¿Sensored or Sensorless?

Wich is the pros and cons of sensored motor?

I go build a 6S single motor with a Xerun 150A with Sensor port.

And wich is the best brand or model?, Turnigy, NTM, Aeolian, Tacon...

Thank you very much.

Hi
I have never used a sensored motor so cannot comment there but I have used various unsensored 50mm and 63mm motors and personally cannot find any reason I would go with sensored.
I only get cogging if I want to start from a complete standstill, and even then it is just for a moment until the wheels are turning and then all is OK.
Personally though I never start from a dead stop, when I get on I always give a small, and I mean small, push - just enough to get rolling. Seems unnatural to me to do otherwise.
With this small push and the already rolling wheels I do not get any cogging, even with a single 50mm motor. (And using various ESCs, even the cheap, and good, FVT120 6S ESC)

WeeChumlee said:

I only get cogging if I want to start from a complete standstill, and even then it is just for a moment until the wheels are turning and then all is OK.

Click to expand...

Now with halls you should can do this.

I am thinking on buy this motor for a Xerun 150A with sensored and 6S Nanotech 8000 25/50:

http://www.ebay.com/itm/5065-50-65-270KV-Heavy-duty-brushless-Sensored-motor-2-6KG-3-8S-for-Skateboard-/181913685694?hash=item2a5ae68ebe:g:iVIAAOSwnNBXVs7f

But I don´t know the brand.

Not many people will sell sensored motors but we sell them here - http://diyelectricskateboard.com/category/electric-skateboard-parts/electric-skateboard-motors/