My first build is almost complete!

Lightweight / Folding / Portable EVs - seats optional
Post Reply
Drei3000   1 µW

1 µW
Posts: 3
Joined: May 14 2016 1:20pm

My first build is almost complete!

Post by Drei3000 » Aug 06 2016 11:03pm

Hey guys,

Just wanted to share my build that is nearing completion :D

Distance: not tested but went 13km and voltage dropped from 4.1V to 3.78V.
Max Speed: 33 km/h
Hill Climb: nothing too steep
Motor: 50mm 270kV i bought off ebay
ESC: 120A 1:8 X-Car off HobbyKing
Battery: 6s6p made out of 18650s which are about 2Ah each. ~260Wh
Mount: Torqueboard mount, however they shipped me the wrong mount so for the moment I am riding this on a 3d printed part! (first one broke, second one is much beefer and more rigid)

Let me know if you have questions or tips!
Attachments
Photo 2016-08-06, 9 37 43 PM.jpg
Longboard side shot
Photo 2016-08-06, 9 37 59 PM.jpg
Bottom
Photo 2016-08-05, 9 50 16 PM (1).jpg
Charging Station
Last edited by Drei3000 on Aug 07 2016 1:43pm, edited 1 time in total.

torqueboards   100 MW

100 MW
Posts: 2940
Joined: May 27 2013 10:02pm
Location: San Francisco, CA
Contact:

Re: My first build is almost complete!

Post by torqueboards » Aug 07 2016 12:37am

You mean the TorqueBoards Mount. :) That doesn't look like the enertion mount. I assume, your Andrei. We've shipped it out to you already.
DIYElectricSkateboard.com Electric Skateboard Kits

Drei3000   1 µW

1 µW
Posts: 3
Joined: May 14 2016 1:20pm

Re: My first build is almost complete!

Post by Drei3000 » Aug 07 2016 1:43pm

torqueboards wrote:You mean the TorqueBoards Mount. :) That doesn't look like the enertion mount. I assume, your Andrei. We've shipped it out to you already.
Yes, sorry Torque board. Got your email this morning, appreciate your customer service on this one. Can't wait to get the correct part :)

Post Reply