Problem with connecting remote, esc and motor

lemon · Jan 28, 2017

Hi,

it's been a while, but I have all parts laying around and wanted to start building the thing (https://endless-sphere.com/forums/viewtopic.php?f=35&t=82548)

parts list:
ESC: FTV 120A Car ESC
Motor: noname 270kV brushless motor
remote: HK GT2E (not GT2B)

But I am running into some problems:

1.) esc cables are blue, orange and yellow - motors cables are red yellow & black

which should i connect? i cant find a manual for that esc.

more problems following, i am sure

psychotiller · Jan 28, 2017

It doesn't matter if the motor/esc is unsensored. plug the wires together. If your motor spins backwards switch any two of the wires around and it will spin forward.

lemon · Jan 28, 2017

they are colored different, how am i supposed to know which one ist right?
shall i try all possibilities? can i damage it by doing that?

psychotiller · Jan 28, 2017

As I said, it doesn't matter.
Follow my directions and you will be fine. 8)

lemon · Jan 29, 2017

ok it works, but i control the motor by the steering wheel, how to fix that?

xadmx · Jan 29, 2017

lemon said:
ok it works, but i control the motor by the steering wheel, how to fix that?

the gt2e sucks you can swap the connectors over inside the remote. but your best just to get a gt2b then you can use a 3d printed case.

lemon · Jan 29, 2017

theres also a 3d model for the gt2e

and i bought the gt2e because the gt2b was not in stock (europe)

psychotiller · Jan 29, 2017

xadmx said:
lemon said:

ok it works, but i control the motor by the steering wheel, how to fix that?

Click to expand...

You should be able to unplug your receiver wire from channel 2 in you receiver and put it in channel 1.

Problem with connecting remote, esc and motor

lemon

10 mW

psychotiller

10 kW

lemon

10 mW

psychotiller

10 kW

lemon

10 mW

xadmx

1 kW

lemon

10 mW

psychotiller

10 kW

Similar threads