Burlier shock struts are in the works for sure. It has ~200lb/in springs now, and I just ordered some 600lb/in springs.
Ill likely be building new shock shafts too, as the existing ones simulate out to fail at ~3900lbs each, and just over 3klbs at 10K cyclic allowables. That being said they just look anemic in the hand.
The outer tube is .625" .065 wall DOM wrapped around 1/2" 4130 solid rod, and where the bolt travel slot cuts thru the solid rod, It looks pretty skimpy.
I will likely remake it in .75" .065 wall 4130 instead of DOM, and then do a .625 .120 wall shaft turned down to .615 for clearance.
The race bike:
24s5p 50c nano tech
Badass custom mofo outrunner 205x177mm 26kv
Peak power in : 420A at 87v
Peak power out: 34 Hp and 105ft/lb
Build to last...
"It will be assaulted by the elements, It will be ravaged by time and it will be destroyed by the user. BUT, if you Stick to the little rules: K.I.S.S., Overbuild everything, and test, review, revise, repeat. It will last"
Team Farfle blog!! http://www.farfleselectrics.blogspot.com