Sharpiecoot
10 µW
- Joined
- May 2, 2021
- Messages
- 5
This is the second generation of my inboard conversion where I switched to a larger controller a yu yang king using the same 48 volt 1800 w go-kart conversion kit motor. It has no problem pushing the 22 ft flat bottom boat. And the second generation I also used a belt replacing the chain drive to hopefully reduce the noise. At the end of the day I think I would love to get rid of the gear reduction and find a motor that would give me 30 kilonewtons at about a thousand rotations per second. I would like that primarily for noise I do not like the high pitch whining. Anyways here's a link to how I put the second generation together. From your experience with the hub motors you think I could get more torque for a lower RPM with one of the hub motors or a pancake motor?
https://youtu.be/XuBi9R0QVuM
Sent from my LG-V930 using Tapatalk
https://youtu.be/XuBi9R0QVuM
Sent from my LG-V930 using Tapatalk