Dual RC motor Surfboard ??

Hello,

I have been wanting to do this for awhile now,
im going to get an old cheap crappy surftboard and use it to put 2 brushless inrunners i think.. not sure if i should go outrunner or inrunner.
Was looking at this one
Specs:
Size: 56x92mm
Kv: 1000rpm/v
Maximum Voltage: 40v
Lipoly Cells: 10s
Max Efficiency: 6000w
Current at Max Efficiency: 145A
Max Current (10s): 312A
No Load Current: 2.6A
Internal Resistance: 0.0071
Shaft: 8mm
Weight: 814g

Using x2 would be about 1.628 kilos
I could use a 10 s pack connected to 2 controllers..'

How would something like this go ?

http://www.hobbyking.com/hobbyking/store/__18853__T5692_Turnigy_Pro_Comp_Brushless_Inrunner_Motor_1000kv.html

so you are going to have motors running at over 30,000 rpm !
What are they going to drive, jets, ? props, ??

did you read this thread ?
http://endless-sphere.com/forums/viewtopic.php?f=39&t=33877

yeah, maybe ill get a cheap trolling motor hmm
I could use a canoe instead but then i would want the biggest motor the boat could handle

Wow nechaus, you are working hard lately, so you want something like this?
[youtube]GVgTWMcM7UU[/youtube]

Similar to ones we saw in the late 80's. Much more powerful than the ideas in this thread http://endless-sphere.com/forums/viewtopic.php?f=39&t=39080