Infinity
10 mW
Hi,
I want to put turnigy 80-100 130kv motor on Johnson/Evinrude 4hp outboard (2.15:1 gear ratio).
Something like this: http://endless-sphere.com/forums/viewtopic.php?f=2&t=49846&p=736675&hilit=outboard#p736675
I read form rcgroups that this motor connected DIRECTLY to a 7.25" x 7" prop draws 80A on 6s lipos. With the gear reduction it should draw about 40A(i guess).
The real question is: That I don't know what controller/esc should I use? (RC or E-bike one and how much amps it must withstand)
I want to put turnigy 80-100 130kv motor on Johnson/Evinrude 4hp outboard (2.15:1 gear ratio).
Something like this: http://endless-sphere.com/forums/viewtopic.php?f=2&t=49846&p=736675&hilit=outboard#p736675
I read form rcgroups that this motor connected DIRECTLY to a 7.25" x 7" prop draws 80A on 6s lipos. With the gear reduction it should draw about 40A(i guess).
The real question is: That I don't know what controller/esc should I use? (RC or E-bike one and how much amps it must withstand)