What would I need from a solar setup to charge a 48v battery

Solar, wind, hydro and other non-fossil sources of electricity.
Post Reply
mcristiani
10 W
10 W
Posts: 82
Joined: Jul 19, 2017 11:17 am

What would I need from a solar setup to charge a 48v battery

Post by mcristiani » Jul 21, 2017 1:23 am

I am new to solar. I was wondering what I would need to charge a 48v li-ion battery using solar.

My idea was to be able to get one or more - connecting only one at a time - 48v batteries that I use for my ebike charged up via solar.

Thanks.

User avatar
amberwolf
100 GW
100 GW
Posts: 24240
Joined: Aug 17, 2009 6:43 am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group
Contact:

Re: What would I need from a solar setup to charge a 48v bat

Post by amberwolf » Jul 21, 2017 2:05 am

In case you don't get other responses:

There's quite a bit of info in the various solar charge threads here
https://endless-sphere.com/forums/searc ... mit=Search
if it helps. It's a lot of reading, though. :(

The second thread in the list is probably a good first start though.

mcristiani
10 W
10 W
Posts: 82
Joined: Jul 19, 2017 11:17 am

Re: What would I need from a solar setup to charge a 48v bat

Post by mcristiani » Jul 21, 2017 10:12 am

I only clicked the link, but already saw thread titles matching what I was looking for.

Thanks!

User avatar
parajared
10 kW
10 kW
Posts: 773
Joined: Apr 16, 2012 11:33 pm
Location: Northern Arizona

Re: What would I need from a solar setup to charge a 48v bat

Post by parajared » Aug 01, 2017 6:29 pm

Arduino relays are a thing that exist and "analog input" is just voltage 1 to 5.
Edit... maybe not the one in this picture, I don't see an analog input port. Velleman VMA406/Adafruit trinket.

Therefore all you need to do is run cell #1 on your lipo balance lead to the analog input port. You will have to connect your Arduino to your computer and program it it to "activate relay" at the right voltage (for me this is about 4.15 volts).

You will connect your solar panel to the "NO port" (normally open) and when the relay triggers it will cut power from your solar panel to your bike.


Image
Image
Attachments
Capture.JPG
Capture.JPG (46.12 KiB) Viewed 92 times
Capture2.JPG
Capture2.JPG (53.15 KiB) Viewed 92 times

Post Reply