Page 1 of 1

Vesc hgltech 75v 200amps

Posted: Mar 20 2021 12:00am
by tailele
Good morning bus, i m news, and i m trying ti build a e-bike with this vesc... Now i connect motors, One rear and One front correctly...but i miss to connect the throttle and the brake. Really the throttle works, but the brake not verry well.
I connect :
Throttle , Red to 5 v , black to gnd and signal to ADC
Brake , One cable on ADC 2 and the second cable to 3.3v..


I m wrong ? I don t find a wrong diagram so for me It Is difficult. Thanks a lot

Re: Vesc hgltech 75v 200amps

Posted: Mar 20 2021 6:54am
by Hayds13
This might help....Ebike Throttle and Brake Connect to VESC and Parameters Setting Tutorial | Flipsky

https://www.youtube.com/watch?v=44qoVyJf-uk

Re: Vesc hgltech 75v 200amps

Posted: Mar 20 2021 7:08am
by district9prawn
You should connect the throttle 5v to the vesc 3.3V supply. This way you will keep the signal value below the maximum of 3.3V.