Fusin 36V hubmotor kit, 800 successful previous owner miles on it.
36V 9Ah D-type NiMH pack (from a Giant suede-e brand bike). I hadn't been able to fully charge it yet at the time I got this data.
Forgot to note the watts at actual specific speeds yet, but if this data is useful, here it is anyway:
2.5 mile trip to work at typical straightway speeds of 12-16MPH, with around a dozen or more full stops and starts for traffic controls:
42V starting rest voltage
40.47V finish rest voltage
34.32V minimum trip voltage
22.4Wh (about 9Wh/Mile)
2.5 mile trip home from work at typical straightway speeds of 12-16MPH, with around a dozen full stops and starts for traffic controls. The light was also powered during this trip (had to put electrical tape over it to keep *every single light source* from turning it off!), which takes roughly 70mA extra:
40.68V starting rest voltage
38.64V finish rest voltage
32.01V minimum trip voltage
23.9Wh (about 9.5Wh/Mile)