Converting to a VEER Carbon Belt Drive (split the BELT, not the FRAME) and IGH

Volvofan

100 mW
Joined
Feb 12, 2019
Messages
39
Location
MA
All-

In case it's useful for others, here's a post on my experience converting my mid-drive e-bike to a carbon belt drive and IGH setup. The frame is all carbon fiber, so it can't be split to pass a Gates carbon belt through in the normal method. The thread below is not very obviously named, as it was a question I was asking when I was first researching how to do this. Hoping this post here might serve as a suitable redirect.

-Jon

https://endless-sphere.com/forums/viewtopic.php?f=3&t=105740
 
Back
Top