Vlog Q76 Build 2017 Sweden uppdate 17/7/2017 vlog7

Show off your E-bike creation here.

Vlog Q76 Build 2017 Sweden uppdate 17/7/2017 vlog7

Postby Sweden_Rob » Tue May 30, 2017 8:13 am

Welcome to Swedish high preformance e-bike building

Now its time to make another bike. This time we are going to build it on qulbix new q76 frame.
We gonna make the building as a video series.

Setup:
Frame: qulbix new 76
Motor: Mxus v3 prepped with ferrofluid
Motor rim: 24" Halo SaS with special orderd high quality stainless steel spokes produced here in Sweden.
Batteries: 22s7p Samsunt 25R
Controller: Adaptto max-e (e-bikes starts to get fun over 8kw :wink: )



Vlog1: Introduction of the project!



Bonus clip: A nice little short clip about the first bike.



Vlog2: Battery building with spotwelding



Vlog3: Minimum requirement of tools when soldering connectors.
In many cases, the first time you do something you cant imagine all the problems you are going to face.
That is why I put together this video, so if you are new at this, maby building the first bike for yourself.
You can see what kinds of tools you need to have for a good soldering work.
If you think I miss something, i would like you to comment below.



Vlog4: Connect Adaptto controller with domino throttle.
Dont forget to put in the resistor, otherwise you can not calibrate the throttle



Vlog5: A look at the new q76 frame
just got the package out and want to share my first view on it!




Thanks for wathing!
Last edited by Sweden_Rob on Mon Jul 17, 2017 4:23 pm, edited 8 times in total. View post history.
Sweden_Rob
10 mW
10 mW
 
Posts: 22
Joined: Mon Mar 20, 2017 4:44 am

Re: Vlog Q76 Build 2017 Sweden uppdate 14/7/2017

Postby Sweden_Rob » Fri Jul 14, 2017 3:49 am

New Update!

Vlog6: First part of ensamble the bike!
Sweden_Rob
10 mW
10 mW
 
Posts: 22
Joined: Mon Mar 20, 2017 4:44 am

Re: Vlog Q76 Build 2017 Sweden uppdate 14/7/2017

Postby litespeed » Fri Jul 14, 2017 7:21 am

Nice job and cute girlfriend.

Tom
I'm married so you know I'm no stranger to pain!
litespeed
100 kW
100 kW
 
Posts: 1162
Joined: Wed Aug 11, 2010 4:42 pm
Location: St. Charles, Missouri

Re: Vlog Q76 Build 2017 Sweden uppdate 14/7/2017

Postby Sweden_Rob » Mon Jul 17, 2017 4:22 pm

thanks Tom! New video out!
Sweden_Rob
10 mW
10 mW
 
Posts: 22
Joined: Mon Mar 20, 2017 4:44 am

Re: Vlog Q76 Build 2017 Sweden uppdate 17/7/2017 vlog7

Postby Sweden_Rob » Mon Jul 17, 2017 4:24 pm

Vlog7: Professional Lacing! Mxus 3k hubmotor with Halo Sas 36h Bicycle rim.

Here is a video when we getting the motors back professional laced with spokes produces with right length and angels for the mxus motor with Halo Sas 24" 36 holes bicycle rim. We waited 2 months so this guy could do the work for us.
I was really tired to drive on a bad laced rim where the spokes loosen up all the time.
Now when I have tested the rim its amazing how straight and strong it feels.
Perhaps problem with the backwheel has end forever

Last edited by Sweden_Rob on Mon Jul 17, 2017 5:08 pm, edited 1 time in total. View post history.
Sweden_Rob
10 mW
10 mW
 
Posts: 22
Joined: Mon Mar 20, 2017 4:44 am


Return to E-Bike Photos & Video

Who is online

Users browsing this forum: bootune and 8 guests