Vlog Q76 Build 2017 Sweden uppdate 12/10/2017 vlog7

Show off your E-bike creation here.
Post Reply
Sweden_Rob
10 mW
10 mW
Posts: 29
Joined: Mon Mar 20, 2017 4:44 am

Vlog Q76 Build 2017 Sweden uppdate 12/10/2017 vlog7

Post by Sweden_Rob » Tue May 30, 2017 8:13 am

Welcome to Swedish high preformance e-bike building

Now its time to make another bike. This time we are going to build it on qulbix new q76 frame.
We gonna make the building as a video series.

Setup:
Frame: qulbix new 76
Motor: Mxus v3 prepped with ferrofluid
Motor rim: 24" Halo SaS with special orderd high quality stainless steel spokes produced here in Sweden.
Batteries: 22s7p Samsunt 25R
Controller: Adaptto max-e (e-bikes starts to get fun over 8kw :wink: )



Vlog1: Introduction of the project!



Bonus clip: A nice little short clip about the first bike.



Vlog2: Battery building with spotwelding



Vlog3: Minimum requirement of tools when soldering connectors.
In many cases, the first time you do something you cant imagine all the problems you are going to face.
That is why I put together this video, so if you are new at this, maby building the first bike for yourself.
You can see what kinds of tools you need to have for a good soldering work.
If you think I miss something, i would like you to comment below.



Vlog4: Connect Adaptto controller with domino throttle.
Dont forget to put in the resistor, otherwise you can not calibrate the throttle



Vlog5: A look at the new q76 frame
just got the package out and want to share my first view on it!




Thanks for wathing!
Last edited by Sweden_Rob on Sun Oct 29, 2017 5:56 pm, edited 5 times in total.

Sweden_Rob
10 mW
10 mW
Posts: 29
Joined: Mon Mar 20, 2017 4:44 am

Re: Vlog Q76 Build 2017 Sweden uppdate 14/7/2017

Post by Sweden_Rob » Fri Jul 14, 2017 3:49 am

New Update!

Vlog6: First part of ensamble the bike!

litespeed
100 kW
100 kW
Posts: 1221
Joined: Wed Aug 11, 2010 4:42 pm
Location: St. Charles, Missouri

Re: Vlog Q76 Build 2017 Sweden uppdate 14/7/2017

Post by litespeed » Fri Jul 14, 2017 7:21 am

Nice job and cute girlfriend.

Tom
I'm married so you know I'm no stranger to pain!

Sweden_Rob
10 mW
10 mW
Posts: 29
Joined: Mon Mar 20, 2017 4:44 am

Re: Vlog Q76 Build 2017 Sweden uppdate 14/7/2017

Post by Sweden_Rob » Mon Jul 17, 2017 4:22 pm

thanks Tom! New video out!

Sweden_Rob
10 mW
10 mW
Posts: 29
Joined: Mon Mar 20, 2017 4:44 am

Re: Vlog Q76 Build 2017 Sweden uppdate 17/7/2017 vlog7

Post by Sweden_Rob » Mon Jul 17, 2017 4:24 pm

Vlog7: Professional Lacing! Mxus 3k hubmotor with Halo Sas 36h Bicycle rim.

Here is a video when we getting the motors back professional laced with spokes produces with right length and angels for the mxus motor with Halo Sas 24" 36 holes bicycle rim. We waited 2 months so this guy could do the work for us.
I was really tired to drive on a bad laced rim where the spokes loosen up all the time.
Now when I have tested the rim its amazing how straight and strong it feels.
Perhaps problem with the backwheel has end forever


Sweden_Rob
10 mW
10 mW
Posts: 29
Joined: Mon Mar 20, 2017 4:44 am

Re: Vlog Q76 Build 2017 Sweden uppdate 3/8/2017 vlog7

Post by Sweden_Rob » Thu Aug 03, 2017 2:16 pm

More videos from building is comming up soon!
The bike is readdy to drive. It was a bit hectic to get it readdy before our roadtrip.
We was in Visby with the bikes. Had the gopro with me so we release a little visby trip here!
Hope you enjoy! The Island is awsome when its comes to bikerideing.

Bonus video: Trip to Visby

Simpleton
1 mW
1 mW
Posts: 16
Joined: Tue Jun 06, 2017 9:55 pm
Location: Texas

Re: Vlog Q76 Build 2017 Sweden uppdate 3/8/2017 vlog7

Post by Simpleton » Thu Aug 03, 2017 4:02 pm

Nice little tour, I've enjoyed your video series.

User avatar
Allex
100 MW
100 MW
Posts: 2894
Joined: Mon Dec 05, 2011 8:46 am
Location: Stockholm, Sweden

Re: Vlog Q76 Build 2017 Sweden uppdate 3/8/2017 vlog7

Post by Allex » Mon Aug 07, 2017 9:44 am

Keep em coming Rob!

Ajsomfan
100 µW
100 µW
Posts: 7
Joined: Wed Jul 19, 2017 12:43 pm
Location: Sweden

Re: Vlog Q76 Build 2017 Sweden uppdate 3/8/2017 vlog7

Post by Ajsomfan » Thu Aug 10, 2017 5:21 am

Love the style with the honda in the little cart . Gotland is a nice place to visit. Did you have any problems with the cops?

Sweden_Rob
10 mW
10 mW
Posts: 29
Joined: Mon Mar 20, 2017 4:44 am

Re: Vlog Q76 Build 2017 Sweden uppdate 3/8/2017 vlog7

Post by Sweden_Rob » Mon Aug 21, 2017 1:51 pm

Ajsomfan wrote:Love the style with the honda in the little cart . Gotland is a nice place to visit. Did you have any problems with the cops?
Yoo yes its a cool little electric producer. Gotland is awsome, no problem with cops there. if you drive carefully when you are around people no one bother, and the cops there is mostly around the clubs. otherwise we didnt see any cops.

Sweden_Rob
10 mW
10 mW
Posts: 29
Joined: Mon Mar 20, 2017 4:44 am

Re: Vlog Q76 Build 2017 Sweden uppdate 3/8/2017 vlog7

Post by Sweden_Rob » Mon Aug 21, 2017 1:52 pm

Allex wrote:Keep em coming Rob!
Thx Alex! when my bike is running again, we need to meet up and I take cameras with me and we do some fresh footage!

Sweden_Rob
10 mW
10 mW
Posts: 29
Joined: Mon Mar 20, 2017 4:44 am

Re: Vlog Q76 Build 2017 Sweden uppdate 3/8/2017 vlog7

Post by Sweden_Rob » Mon Aug 21, 2017 1:53 pm

Simpleton wrote:Nice little tour, I've enjoyed your video series.
Thanks alot!

Sweden_Rob
10 mW
10 mW
Posts: 29
Joined: Mon Mar 20, 2017 4:44 am

Re: Vlog Q76 Build 2017 Sweden uppdate 12/9/2017 vlog7

Post by Sweden_Rob » Tue Sep 12, 2017 4:24 pm

It was a time since last!
I have burned adaptto controllers like an assebly line. To much water this summer.
When I get my controllers back Im going to shoot a video how im going to make it waterproof cause this makes me crazy!
While I waiting for my controllers to come back I took Patricias bike for a ride.
Enjoy!


Bonus video: The golden bike for a ride!

sailah
10 mW
10 mW
Posts: 25
Joined: Fri Aug 13, 2010 4:39 pm

Re: Vlog Q76 Build 2017 Sweden uppdate 12/9/2017 vlog7

Post by sailah » Sun Sep 17, 2017 8:51 am

Thanks for all your videos rob, enjoyed them all.

I'm also building a Q76R and wondering your thoughts on batteries. You seem to use the plastic cell spacers on your builds. Would you recommend this method over laying them like a honeycomb and gluing them? Is removing a bad cell almost a guarantee in a pack? I hate to go thru all the troubling of gluing and packing them in there only to find I regret not being able to easily extract a bad cell.

I'm using Samsung 25R cells as you are, I bought 250 just to be sure.

I hate to reinvent the wheel as you've shown your packs work and I'm dealing with exactly the same frame.

I was inclined to building them with glue and get the extra capacity 20S12P but now I'm thinking maybe I give up capacity for convenience in repair.

Thanks

Sweden_Rob
10 mW
10 mW
Posts: 29
Joined: Mon Mar 20, 2017 4:44 am

Re: Vlog Q76 Build 2017 Sweden uppdate 12/9/2017 vlog7

Post by Sweden_Rob » Wed Sep 20, 2017 3:27 pm

sailah wrote:Thanks for all your videos rob, enjoyed them all.

I'm also building a Q76R and wondering your thoughts on batteries. You seem to use the plastic cell spacers on your builds. Would you recommend this method over laying them like a honeycomb and gluing them? Is removing a bad cell almost a guarantee in a pack? I hate to go thru all the troubling of gluing and packing them in there only to find I regret not being able to easily extract a bad cell.

I'm using Samsung 25R cells as you are, I bought 250 just to be sure.

I hate to reinvent the wheel as you've shown your packs work and I'm dealing with exactly the same frame.

I was inclined to building them with glue and get the extra capacity 20S12P but now I'm thinking maybe I give up capacity for convenience in repair.

Thanks

Hey! Nice to hear about your build!
I would say use plastic cell spacer, probibly you never going need battery change, if you made it good and everything. But a good thing is that the cells get much better cooling with space between them. The cells get up in temerature while driving hard and charging. I would say use plasticspacers. But if you want high capacity you maby want to glue them.
First I had 9p then I went to 7p. This because I want good flow between the cell packs and short cabels.
The other thing is the weight. 7p is okey but it would be nice to have an even smaler battpack.
Drove alex bicycle for a couple days ago. His bike is around 30 kg. The bike was so freaking fun to drive cause the low weight. and when he runs on 7,5 kw its as mine on 10 kw.
Dont build to big and heavy at the beginning. Many do this and then they realise that the bike feels like a scooter moped.
The third thing is you always want it to be easy to lift in and out the bat package from the frame.

What controller are you going to ride on?

sailah
10 mW
10 mW
Posts: 25
Joined: Fri Aug 13, 2010 4:39 pm

Re: Vlog Q76 Build 2017 Sweden uppdate 12/9/2017 vlog7

Post by sailah » Sat Sep 23, 2017 9:09 am

Hi rob, thanks for your info.

I feel like I've already got a heavy bike with the QS205 motor and moto rims. Plus I'm not a lightweight either.

I will get some spacers and see how I like it.

I'm using a power velocity 18F controlller from Vad here in US. I'm still waiting on it. I was going to use adaptto but I kept hearing about problems with them and lack of support. Plus no one is selling them anyways. I like the idea of smartphone dashboard so we will see how it goes. Was a lot cheaper too.

Sweden_Rob
10 mW
10 mW
Posts: 29
Joined: Mon Mar 20, 2017 4:44 am

Re: Vlog Q76 Build 2017 Sweden uppdate 12/10/2017 vlog7

Post by Sweden_Rob » Sun Oct 29, 2017 5:56 pm

Bonus clip:Octobert ride! Wet, cold and awesome!

User avatar
Cricket_Swe
100 W
100 W
Posts: 119
Joined: Sun May 22, 2016 4:01 am
Location: Sweden

Re: Vlog Q76 Build 2017 Sweden uppdate 12/10/2017 vlog7

Post by Cricket_Swe » Tue Oct 31, 2017 12:27 am

Nice! Keep it up man! :D

mpmoller
1 mW
1 mW
Posts: 17
Joined: Sun Oct 22, 2017 3:12 pm

Re: Vlog Q76 Build 2017 Sweden uppdate 12/10/2017 vlog7

Post by mpmoller » Tue Nov 14, 2017 3:54 pm

Have you gotten a new controller and waterproofed it? I would love to see. I am about to do the same to my adaptto controller. Nice videos! Really like the video with the summer trip with your girlfriend. :D

Post Reply

Who is online

Users browsing this forum: Allex, electronicru, scrambler and 10 guests