spektrolyte
10 W
You wind it like this, it's going to take 420 metres of 0.5mm enamelled copper wire which will cost me £10 plus maybe several hours, of which I have plenty at the moment. Worth a try considering the motors are toast otherwise.
A minimal Q76 offroad build
- Thread starter spektrolyte
- Start date
You wind it like this, it's going to take 420 metres of 0.5mm enamelled copper wire which will cost me £10 plus maybe several hours, of which I have plenty at the moment. Worth a try considering the motors are toast otherwise.
Cephalotus
10 kW
- Joined
- Jun 18, 2012
- Messages
- 755
What about a BionX D with external controller?
https://endless-sphere.com/forums/viewtopic.php?t=90037
Motor weights just 4kg and with a 20s battery should easily reach 50km/h.
I don't know if you would be happy with the maximum torque, I assume 60-80A phase current should be a sensible limit and that's not for continous useage.
You can try the Simulation, the BionX D is included in the motor list: http://www.ebikes.ca/tools/simulator.html
I also don't know which controller works well and which doesn't.
https://endless-sphere.com/forums/viewtopic.php?t=90037
Motor weights just 4kg and with a 20s battery should easily reach 50km/h.
I don't know if you would be happy with the maximum torque, I assume 60-80A phase current should be a sensible limit and that's not for continous useage.
You can try the Simulation, the BionX D is included in the motor list: http://www.ebikes.ca/tools/simulator.html
I also don't know which controller works well and which doesn't.
