ElectricGod
10 MW
I picked up an A2B. It was a show room unit that has been collecting dust for several years. It's in pristine condition. The pack was run down pretty good, but recovered nicely. Geez these things are sloooooow and weak! Who in their right mind would EVER pay $2600 for a weak EV like this? Yeah it's a nice frame, but geez that's highway robbery! what's worse is the controller is inside the motor...that's just a failure waiting to happen!
The frames are super nice TIG welded aluminum and precision made with decent components. The back shock feels too soft despite cranking the tension screw. Maybe the gas cylinder has leaked? The front shocks are fine. I think I'll switch over to hydraulic brakes and replace the back shock but otherwise leave the components as is. The back dropouts are pretty weak, but OK for 500 watts. They will need reinforcing.
Other than a thick layer of dust the bike is perfect. There's zero wear on the tires. I bet it has less than 10 miles on it.
The frames are super nice TIG welded aluminum and precision made with decent components. The back shock feels too soft despite cranking the tension screw. Maybe the gas cylinder has leaked? The front shocks are fine. I think I'll switch over to hydraulic brakes and replace the back shock but otherwise leave the components as is. The back dropouts are pretty weak, but OK for 500 watts. They will need reinforcing.
Other than a thick layer of dust the bike is perfect. There's zero wear on the tires. I bet it has less than 10 miles on it.