Mongoose fatbike BBSHD build

Show off your Ebike creation here.
Post Reply
powrtrip   1 mW

1 mW
Posts: 12
Joined: Sep 03 2020 11:05am

Mongoose fatbike BBSHD build

Post by powrtrip » Jan 21 2021 10:34am

So I wanted to add some build info that I didn't find .... using the 120mm motor you'll need spacers. The best line up with both cranks fairly even distanced, 8mm worth of spacers go on the bracket side. The chain ring is dead middle when doing this. Also plenty of room for casing and bottom chainstay...
IMG_20210121_085354910.jpg
IMG_20210121_085354910.jpg (3.21 MiB) Viewed 273 times
IMG_20210121_091522668.jpg
IMG_20210121_091522668.jpg (2.36 MiB) Viewed 273 times
IMG_20210121_092328384.jpg
IMG_20210121_092328384.jpg (651.72 KiB) Viewed 273 times

Post Reply