New e- fatbike build

Show off your Ebike creation here.
Post Reply   1 µW

1 µW
Posts: 1
Joined: May 05 2021 11:06am

New e- fatbike build

Post by » May 05 2021 12:18pm

Just build this new frame -mid drive with Tongshend and wonder if i could get more juice from the stock 500w 48v with my 20amp batt using the stock vlcd6 display. Like upgrading the firware. I am a newie to the e-world. Using my wife bike battery just for test,,,frame batt is on the way.

User avatar
pwd   10 kW

10 kW
Posts: 528
Joined: Oct 11 2011 12:01pm
Location: Ontario, Canada

Re: New e- fatbike build

Post by pwd » May 05 2021 1:04pm

Have a look in the mid drive section "EBike Non-hub Motor Drives", there are many posts there about open source firmware for the TSDZ2/displays
2WD Commuter/Street Build viewtopic.php?f=6&t=98286:
Rocky Mountain Element
Magic Pie 4 front w/ Infineon 4 Clone @ 70A phase + Leafmotor 1500 rear w/ Infineon 4 Clone @ 200A phase
Samsung 40T 14S7P

Offroad Build viewtopic.php?f=6&t=102195:
2019 Rocky Mountain Blizzard 20
Cyclone "3kw" 13T motor to 36T chain ring then 32T chain ring to 11T-46T Cassette @ 100A phase
Molicel P42A 21S3P

Post Reply