Your Creation's Before & After Pics

Show off your E-bike creation here.

Re: Your Creation's Before & After Pics

Postby SlowCo » Thu Feb 02, 2017 11:20 am

Beautiful transformation!
Looks much better now. I'll check out your build thread later.
SlowCo
1 kW
1 kW
 
Posts: 400
Joined: Mon Jan 05, 2015 5:43 pm
Location: The Netherlands

Re: Your Creation's Before & After Pics

Postby Green Werks » Sun Mar 12, 2017 7:16 am

A gary Fisher with a edge1500w and a programmable sine wave controller 50 amp and a CA
powered by a 52v 24ah 50a continuous and 70 amp burst battery pack
Attachments
es gf.jpg
gf edge
es gf.jpg (227.85 KiB) Viewed 344 times
es gf2.jpg
gf edge
es gf2.jpg (175.02 KiB) Viewed 344 times
Last edited by Green Werks on Sun Mar 12, 2017 7:34 am, edited 1 time in total. View post history.
User avatar
Green Werks
100 µW
100 µW
 
Posts: 7
Joined: Tue Nov 08, 2016 9:10 am

Re: Your Creation's Before & After Pics

Postby Wolfeman » Sun Mar 12, 2017 9:27 pm

Green Werks wrote:A gary Fisher with a edge1500w and a programmable sine wave controller 50 amp and a CA
powered by a 52v 24ah 50a continuous and 70 amp burst battery pack


Great looking bike Green Werks. I like your choice of components, simple but with a good amount of power. A Suntour NCX suspension seat post would be about the only thing I'd add. $89 on eBay.
Trek 4300 w/ H3580 Crystalyte at 52 V
viewtopic.php?f=3&t=82738
User avatar
Wolfeman
10 W
10 W
 
Posts: 89
Joined: Tue May 13, 2014 12:09 pm
Location: West Coast USA

Re: Your Creation's Before & After Pics

Postby Green Werks » Mon Mar 13, 2017 4:33 am

Thank You that bike is a lot of fun
I def would like to get one of those seat post
and the only other up grade that I am going to do is a set of hydraulic disc brakes
Cheers
User avatar
Green Werks
100 µW
100 µW
 
Posts: 7
Joined: Tue Nov 08, 2016 9:10 am

48v 15Ah

Postby RollinB » Sun Mar 19, 2017 12:53 pm

moderator edit to add: this frame is a "Norco Nation Chopper"

image.jpeg
After
image.jpeg (71.86 KiB) Viewed 166 times
Attachments
image.jpeg
After
image.jpeg (92.13 KiB) Viewed 166 times
image.jpeg
image.jpeg (96.22 KiB) Viewed 166 times
image.jpeg
image.jpeg (96.53 KiB) Viewed 166 times
Last edited by spinningmagnets on Sun Mar 19, 2017 7:00 pm, edited 1 time in total. View post history.
RollinB
1 µW
1 µW
 
Posts: 3
Joined: Sun Mar 19, 2017 10:10 am

Re: Your Creation's Before & After Pics

Postby torker » Sun Mar 19, 2017 4:55 pm

Welcome rollinb Cool bike- looks like the business with a dig directdrive and plenty room for a big batt What specs is it?
Dave When I die I want to slide in sideways yelling WooHoo what a ride !

Giant Rincon w rear 9C 6*10 10s Lipo 30+ amps
Specialized FSR Comp 9C 6*10 15s x 50A 3300 W :)
User avatar
torker
1 MW
1 MW
 
Posts: 1557
Joined: Thu Oct 16, 2008 8:46 pm
Location: Udall, Ks.

Re: Your Creation's Before & After Pics

Postby RollinB » Mon Mar 20, 2017 4:22 pm

Thanks torker.
Crystalite hub (35** or 53**,I frgt), infineon 40 amp controller, 12s3p lipo.
40 amp bms. Top speed 60km/h. range 28km-42k, usually the lower-i dont peddle
Built back in 2012. Currently replacing battery with the tesla 18650 cells.
Will be 8p12s.
Is a blast to ride.
RollinB
1 µW
1 µW
 
Posts: 3
Joined: Sun Mar 19, 2017 10:10 am

Re: Your Creation's Before & After Pics

Postby torker » Tue Mar 21, 2017 9:08 am

Closest thing I had to that was a tour easy clone I built and powered it with a front hub. I built the bike in my avatar a few yrs ago. It is finally going to get some pedals :) and a bottle battery with bms. I ran it on lipos but my son and his buddies puffed a couple those on one ride. So I am turning the amps down (putting the shunt back to stock) and setting it up so my wife can ride it without killing herself...
Dave When I die I want to slide in sideways yelling WooHoo what a ride !

Giant Rincon w rear 9C 6*10 10s Lipo 30+ amps
Specialized FSR Comp 9C 6*10 15s x 50A 3300 W :)
User avatar
torker
1 MW
1 MW
 
Posts: 1557
Joined: Thu Oct 16, 2008 8:46 pm
Location: Udall, Ks.

Re: Your Creation's Before & After Pics

Postby RollinB » Wed Mar 22, 2017 7:51 pm

The Code hydraulic rear disc brake was a needed upgrade. Have the regen button beside thumb throttle.
I also have the bb7 on the front, with the regen button integrated in mechanical lever.
Attachments
image.jpeg
image.jpeg (96.2 KiB) Viewed 43 times
RollinB
1 µW
1 µW
 
Posts: 3
Joined: Sun Mar 19, 2017 10:10 am

Previous

Return to E-Bike Photos & Video

Who is online

Users browsing this forum: No registered users and 3 guests