Your Creation's Before & After Pics

[SlowCo]

Beautiful transformation!
Looks much better now. I'll check out your build thread later.

[Green Werks]

A gary Fisher with a edge1500w and a programmable sine wave controller 50 amp and a CA
powered by a 52v 24ah 50a continuous and 70 amp burst battery pack

[Wolfeman]

A gary Fisher with a edge1500w and a programmable sine wave controller 50 amp and a CA
powered by a 52v 24ah 50a continuous and 70 amp burst battery pack

Great looking bike Green Werks. I like your choice of components, simple but with a good amount of power. A Suntour NCX suspension seat post would be about the only thing I'd add. $89 on eBay.

[Green Werks]

Thank You that bike is a lot of fun
I def would like to get one of those seat post
and the only other up grade that I am going to do is a set of hydraulic disc brakes
Cheers

[RollinB]

moderator edit to add: this frame is a "Norco Nation Chopper"

After

image.jpeg (71.86 KiB) Viewed 4386 times

[torker]

Welcome rollinb Cool bike- looks like the business with a dig directdrive and plenty room for a big batt What specs is it?

[RollinB]

Thanks torker.
Crystalite hub (35** or 53**,I frgt), infineon 40 amp controller, 12s3p lipo.
40 amp bms. Top speed 60km/h. range 28km-42k, usually the lower-i dont peddle
Built back in 2012. Currently replacing battery with the tesla 18650 cells.
Will be 8p12s.
Is a blast to ride.

[torker]

Closest thing I had to that was a tour easy clone I built and powered it with a front hub. I built the bike in my avatar a few yrs ago. It is finally going to get some pedals and a bottle battery with bms. I ran it on lipos but my son and his buddies puffed a couple those on one ride. So I am turning the amps down (putting the shunt back to stock) and setting it up so my wife can ride it without killing herself...

[RollinB]

The Code hydraulic rear disc brake was a needed upgrade. Have the regen button beside thumb throttle.
I also have the bb7 on the front, with the regen button integrated in mechanical lever.

[audioecology]

Claud Butler Majecstic (apparently) I picked up off ebay because it had the wide tyres on a retro frame. Fast forward and the bike has carbon MTB forks with 180mm disc brake and a Bafang BBS02 750W built into a cafe racer. 52V 8Ah battery in the satchel. What do you think?

[Janis]

Cyclone 3000w, 18s6p r25 batteries, 60a bluethooth controller.
Battery case is made out of 10 mm aluminium, but side covers are plywood with vinyl sticker.

[Rovii]

Only a compromise solution

[boytitan]

https://endless-sphere.com/forums/viewt ... 12&t=86228

Before you start yelling this is in the wrong place- this one in e-moto/scooter has 1 post. Perhaps this thread should be all EV before & after not just e-bicycles?
https://endless-sphere.com/forums/viewt ... 12&t=83714

The end product is so nice I almost want a scooter lol.

[izeman]

The end product is so nice I almost want a scooter lol.

could you guys please refrain from
a) quoting whole posts
b) commenting in this thread at all, use PM for that

[torker]

b) commenting in this thread at all, use PM for that.... Seriously??

[ePassionHomebrew]

Before, Cannondale Badboy 6 brand new June 2014..

After, ePassion 1000w rear hub motor & Hailong 48v 11.6ah Battery, April 2017..

IMG_20170411.jpg (239.5 KiB) Viewed 789 times

[ePassionHomebrew]

Before, Cannondale Badboy 6 brand new June 2014..

FB_IMG_1402043886334.jpg

After, ePassion 1000w rear hub motor & Hailong 48v 11.6ah Battery, April 2017..

IMG_20170411.jpg

Can't get my second 'after' pic to show Incline, anybody know why??

[spinningmagnets]

The pic might have been slightly too large, and the sites software automatically converts it to a link. I usually resize to approximately 600 X 400 before posting. If that isn't the reason, I don't know why...

[smeagol222]

I found a really easy way is to use imgur, sharing options have an easy phpBB link with easy thumnail size option to click (it adds before the '.jpg' has a little 'm' for medium, 'l' for large etc).
eg.

Code: Select all

[img]http://i.imgur.com/JyRFJTdm.jpg[/img]

Also if you have a bunch of images (bulk upload to imgur) then you can click the pencil on one image, select them all then select the 'view image info' dropdown-->generate image links. Then select the phpBB option.

[Eskimo]

New paint&smaller rear wheel.

Kevät 2017 004.jpg (122.25 KiB) Viewed 3731 times

Kevät 2017 008.jpg (101.06 KiB) Viewed 3731 times

[lio]

Before:
Home made aluminium frame (15 years ago )



After:
Motor: car alternator 120A
Controller: 48V 1500W
Batt: Lipo 4x4S 16Ah (68V)
Speed : 70Km/h (44mph)
Power max: 3200 W
9 speeds
Gear reduction: 5.6
Weight: 23 Kg

Video on the road https://www.youtube.com/watch?v=pJXladJ ... e=youtu.be





Video on the road https://www.youtube.com/watch?v=pJXladJ ... e=youtu.be

[lester12483]

Careful not to get zapped with all those lose wires.

[negativepitch]

Before:
Specialzed Rockhopper Comp


After:
Swapped out offroad tires for Maxxis Hookworm 29" street tires
Swapped out the original hard saddel for the more comfortable Planet Bike Men's A.R.S.
Added a Topeak MTX to carry my work clothes and laptop
Added BBSHD with 20ah battery from lunacycle.com


This is my first ebike build and despite it being quite a bit more challenging than I'd anticipated, the long nights were absolutely worth it because this thing is a blast. I plan to use it for daily commuting 40 miles round-trip to work with some pretty steep hills.

[Wolfeman]

Great looking bike negative pitch. Looks clean, fast and very fun.

[zerodebikes]

Tangent ascent inboard where the gearbox usually goes.. super fun!