Your Creation's Before & After Pics

Show off your E-bike creation here.
User avatar
eCue   10 kW

10 kW
Posts: 631
Joined: Nov 03 2017 5:14pm
Location: Vancouver Island , Canada

Re: Your Creation's Before & After Pics

Post by eCue » Dec 06 2017 10:16am

Would be a great friction drive bike ..
Solar charge station on wheels join the Revolution

Robert62   1 µW

1 µW
Posts: 2
Joined: Dec 05 2017 8:44pm

Re: Your Creation's Before & After Pics

Post by Robert62 » Dec 06 2017 9:35pm

SlowCo wrote:
Dec 06 2017 9:04am
:lol: 8)

Please also make a wide front fork and insert the same wheel in there as is in the rear and then mount a Cyclone 3000W middrive to the chain drive!
Funny you should mention that. I had the same thought....
Robert

SlowCo   10 kW

10 kW
Posts: 916
Joined: Jan 05 2015 5:43pm
Location: The Netherlands

Re: Your Creation's Before & After Pics

Post by SlowCo » Dec 07 2017 5:40am

Go for it!
I'm subscribed to this thread so will hopefully see that result in the near future. Or start a built thread for it on E-S and leave a link to it here. :)

electronicru   1 µW

1 µW
Posts: 2
Joined: Nov 19 2017 4:31am

Re: Your Creation's Before & After Pics

Post by electronicru » Dec 08 2017 8:47am

left (before), right (after)
it was ... 1500W speed 45 km/h
has become ... 8000W speed 70km/h
Attachments
before and after_.jpg

SlowCo   10 kW

10 kW
Posts: 916
Joined: Jan 05 2015 5:43pm
Location: The Netherlands

Re: Your Creation's Before & After Pics

Post by SlowCo » Dec 09 2017 6:23pm

electronicru wrote: left (before), right (after)
it was ... 1500W speed 45 km/h
has become ... 8000W speed 70km/h
Very nice! 8)
Please tell us more: Which motor, controller, battery etc?

electronicru   1 µW

1 µW
Posts: 2
Joined: Nov 19 2017 4:31am

Re: Your Creation's Before & After Pics

Post by electronicru » Dec 10 2017 1:02pm

stock motor + “chupasos” :D (forced air cooling)
https://youtu.be/-ee1mJnZ71k
Battery
https://youtu.be/pjHiYKFRZ-o
Stock Controller. Upgrade mosfets, capacitors + forced air cooling + arduino

SlowCo   10 kW

10 kW
Posts: 916
Joined: Jan 05 2015 5:43pm
Location: The Netherlands

Re: Your Creation's Before & After Pics

Post by SlowCo » Dec 10 2017 1:48pm

Very good result!

User avatar
eCue   10 kW

10 kW
Posts: 631
Joined: Nov 03 2017 5:14pm
Location: Vancouver Island , Canada

Re: Your Creation's Before & After Pics

Post by eCue » Dec 10 2017 3:54pm

Friction drive ?

Image

All the comforts of a car without the comfort !
Solar charge station on wheels join the Revolution

Buk___   10 kW

10 kW
Posts: 750
Joined: Jul 28 2017 5:59pm

Re: Your Creation's Before & After Pics

Post by Buk___ » Dec 10 2017 4:43pm

eCue wrote:
Dec 10 2017 3:54pm
Friction drive ?
Does it rub you the wrong way :)

User avatar
eCue   10 kW

10 kW
Posts: 631
Joined: Nov 03 2017 5:14pm
Location: Vancouver Island , Canada

Re: Your Creation's Before & After Pics

Post by eCue » Dec 11 2017 12:25pm

The aero is kinda of upsetting :D but the sunroof makes up for it notice the spoiler :D now if it only had a nose cone ! .. :pancake:
Solar charge station on wheels join the Revolution

webpablo   1 µW

1 µW
Posts: 2
Joined: Dec 11 2017 4:32pm

Re: Your Creation's Before & After Pics

Post by webpablo » Dec 11 2017 4:59pm

I wanted a commuter that would handle my 6 mile commute in Seattle. This is what I landed on…
Before was a brand new Raleigh Clubman Steel Framed Disc brake Road Bike.
raleigh-clubman-277677-1.jpg
raleigh-clubman-277677-1.jpg (83.01 KiB) Viewed 3048 times
After: Bafang BBS02 install
IMG_0096.jpg
The install shop (alki Bike and Board in Seattle, WA) setup a nice little bar end for throttle + controller
I wired in a SuperNova E3 headlight and taillight(not pictured) wired directly to the BBS02's headlight connector.
IMG_0097.jpg
Since I didn't want to give up a brake cut off or my STI shifters, I ordered these and had the shop install them. The used a U-brake noodle to make the angle work on the rear disc brake.
https://em3ev.com/shop/hwbs-ebrake-sensor/
IMG_0098.jpg

User avatar
motomech   1 GW

1 GW
Posts: 3168
Joined: Sep 11 2010 12:21am
Location: Tucson Az.

Re: Your Creation's Before & After Pics

Post by motomech » Dec 11 2017 6:24pm

electronicru wrote:
Dec 10 2017 1:02pm
stock motor + “chupasos” :D (forced air cooling)
https://youtu.be/-ee1mJnZ71k
Battery
https://youtu.be/pjHiYKFRZ-o
Stock Controller. Upgrade mosfets, capacitors + forced air cooling + arduino
“chupasos” = Suckers :D
Motomech

'03 Rocky Mountain Edge 2WD 260 Q100H frt and Ezee V1 rear 2 Elifebike 20A & 25A 9-FET controllers 12S/20Ah Multistar Lipo rear 5Ah Turnigy frt Luna Cyclops Extra lite Alex 24DM rims, Crazy Bobs run ghetto tubeless. 25 mph. Mean Well HLG-320H-54A
viewtopic.php?f=3&t=83430
'07 GT Idive 4 4.0, Q100C 201 14S LiPoly elifebike 9-FET 20A controller. 23 MPH.
viewtopic.php?f=3&t=49691&p=1378484#p1378484

imagineaudio   1 mW

1 mW
Posts: 11
Joined: Aug 04 2016 4:16pm
Location: Los Angeles, CA

Re: Your Creation's Before & After Pics

Post by imagineaudio » Dec 14 2017 9:03pm

webpablo wrote:
Dec 11 2017 4:59pm
I wanted a commuter that would handle my 6 mile commute in Seattle. This is what I landed on…
Before was a brand new Raleigh Clubman Steel Framed Disc brake Road Bike.
raleigh-clubman-277677-1.jpg

After: Bafang BBS02 install
IMG_0096.jpg

The install shop (alki Bike and Board in Seattle, WA) setup a nice little bar end for throttle + controller
I wired in a SuperNova E3 headlight and taillight(not pictured) wired directly to the BBS02's headlight connector.
IMG_0097.jpg

Since I didn't want to give up a brake cut off or my STI shifters, I ordered these and had the shop install them. The used a U-brake noodle to make the angle work on the rear disc brake.
https://em3ev.com/shop/hwbs-ebrake-sensor/
IMG_0098.jpg

How is that bag mounted to the frame?

bmrcfreak   10 mW

10 mW
Posts: 20
Joined: Sep 11 2014 11:33pm
Location: USA

Re: Your Creation's Before & After Pics

Post by bmrcfreak » Dec 16 2017 10:52pm

BBS02 hauls wood nicely :mrgreen:
Attachments
20171215_142732-490x1008.jpg
20171215_142732-490x1008.jpg (218.25 KiB) Viewed 2884 times

User avatar
Chalo   100 GW

100 GW
Posts: 7157
Joined: Apr 29 2009 11:29pm
Location: Austin, Texas

Re: Your Creation's Before & After Pics

Post by Chalo » Dec 16 2017 11:06pm

webpablo wrote:
Dec 11 2017 4:59pm
The install shop (alki Bike and Board in Seattle, WA)
Yay! That used to be my neighborhood shop! Tell Stu "ahoy" for me. I think about him often, and how he gave so many young folks their first job (when the bike shop I work in can only really absorb black belt mechanics). Hats off.
This is to express my gratitude to Justin of Grin Technologies for his extraordinary measures to save this forum for the benefit of all.

User avatar
Sinclair   1 µW

1 µW
Posts: 1
Joined: Dec 17 2017 5:58am
Location: Berlin
Contact:

Re: Your Creation's Before & After Pics

Post by Sinclair » Dec 17 2017 11:54am

Carver Drift 01 2014
IMG_2335.JPG
IMG_2335.JPG (112.42 KiB) Viewed 2855 times
Carver Drift 01 2014
Bafang BBS02 48V 750W
52V 14Ah shark pack
Display 750C
Lekkie 36T
Shimano SLX derailleur + shifter upgrade
KMC X10e chain upgrade

Shark pack does not fit in frame, carried in backpack. Overall super easy conversion.
Super stoked with it, rides superb!


IMG_3615.jpg
IMG_3615.jpg (169.66 KiB) Viewed 2855 times
IMG_4050.JPG
IMG_4050.JPG (136.35 KiB) Viewed 2855 times
IMG_3615.jpg
IMG_3615.jpg (169.66 KiB) Viewed 2855 times
Attachments
IMG_3330.JPG
IMG_3330.JPG (104.05 KiB) Viewed 2855 times
IMG_3353.JPG
IMG_3353.JPG (182.04 KiB) Viewed 2855 times

Sdmountain   1 µW

1 µW
Posts: 2
Joined: Dec 23 2017 11:31pm

Re: Your Creation's Before & After Pics

Post by Sdmountain » Dec 23 2017 11:43pm

Fuji Reveal Large Frame, 27.5” Wheels, Full Suspension, BBSHD Ludicrous, Luna Sharkpack 52V

Hardest part of the build was upfront leg work in what seems to be the 1 in 500 shot to find a FS frame with 27.5 wheels, straight downtube to avoid the “udder” and its lack of clearance. On top of that it squeezed the Sharkpack inside the triangle. I did have to rotate the shock to squeeze it for a little more all black “stealth”.

Coinciding with this, we also built a Fuji 29er, however Sharkpack has to go under the downtube due to geometry differences.

This is a blast to ride, only 2 savvy hikers have even noticed that it is possibly an electric bike!
A2D1E859-F30F-4363-86E4-E74ED77D2FA5.jpeg
Fuji Reveal
2071BEDF-B9AF-47AB-8E15-5EE6EE27BE98.jpeg
Full Suspension 52V BBSHD
2071BEDF-B9AF-47AB-8E15-5EE6EE27BE98.jpeg (234.38 KiB) Viewed 2698 times

User avatar
amberwolf   100 GW

100 GW
Posts: 25127
Joined: Aug 17 2009 6:43am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group
Contact:

Re: Your Creation's Before & After Pics

Post by amberwolf » Jan 09 2018 12:21am

I've done a little work on the SB Cruiser trike,
https://endless-sphere.com/forums/viewt ... 5#p1349263
neatening up the headlight (new mount), and finally replaced the "temporary" year-old tiller fix with a new tiller tube, so a few pics. Kirin was supervising. (and the first pic below was taken at the same time as the two below it; it looks darker due to the camera stepping down the brightness to compensate for the headlight and downlighting)

Image

Image

Image

Side view of the tiller stuff (last night before I got the headlight part done)
Image

and the old ziptied-on headlight and shade
Image

webpablo   1 µW

1 µW
Posts: 2
Joined: Dec 11 2017 4:32pm

Re: Your Creation's Before & After Pics

Post by webpablo » Jan 09 2018 1:10pm

imagineaudio wrote:
Dec 14 2017 9:03pm
webpablo wrote:
Dec 11 2017 4:59pm
I wanted a commuter that would handle my 6 mile commute in Seattle. This is what I landed on…
Before was a brand new Raleigh Clubman Steel Framed Disc brake Road Bike.
raleigh-clubman-277677-1.jpg

After: Bafang BBS02 install
IMG_0096.jpg

The install shop (alki Bike and Board in Seattle, WA) setup a nice little bar end for throttle + controller
I wired in a SuperNova E3 headlight and taillight(not pictured) wired directly to the BBS02's headlight connector.
IMG_0097.jpg

Since I didn't want to give up a brake cut off or my STI shifters, I ordered these and had the shop install them. The used a U-brake noodle to make the angle work on the rear disc brake.
https://em3ev.com/shop/hwbs-ebrake-sensor/
IMG_0098.jpg

How is that bag mounted to the frame?
I it mounted using a Salsa Carry anything cage: https://www.rei.com/product/117442/sals ... ith-straps

And the bag is the Salsa Carry anything bag: https://www.rei.com/product/117424/sals ... g-cage-bag

The battery the shop used with my Kit was pretty much a bare wrapped battery. So this the solution they use. I like it because it doesn't scream E-Bike. =D

User avatar
vlaca2   10 W

10 W
Posts: 96
Joined: Dec 19 2014 12:10pm
Location: Hungary

Re: Your Creation's Before & After Pics

Post by vlaca2 » Jan 10 2018 9:36am

Hi All!

My new middrive hardtrail:

Before:
IMG_1716-640.jpg
After:
IMG_2072-640.jpg
IMG_2072-640.jpg (206.31 KiB) Viewed 2357 times
Test videos:





Middrive hardtail e-bike build: https://endless-sphere.com/forums/viewt ... 28&t=91875
Scrub Psycho e-mtb build: viewtopic.php?f=35&t=66244
MBS Pro 12 e-mtb build: viewtopic.php?f=35&t=68710
Electric Drift Trike build: https://endless-sphere.com/forums/viewt ... 35&t=84936

Monkeypowah   1 mW

1 mW
Posts: 19
Joined: Nov 22 2017 5:04pm

Re: Your Creation's Before & After Pics

Post by Monkeypowah » Jan 23 2018 2:32pm

Originally started as a 2WD on a Giant frame, went and bought thru axle forks so working out how top get front hub connected...are there any adaptors out there.

Image

sannis   100 µW

100 µW
Posts: 9
Joined: Oct 11 2016 12:17pm

Re: Your Creation's Before & After Pics

Post by sannis » Jan 29 2018 6:15am

Monkeypowah wrote:
Jan 23 2018 2:32pm
Originally started as a 2WD on a Giant frame, went and bought thru axle forks so working out how top get front hub connected...are there any adaptors out there.

Image
What is this frame? How You put fat bike tyre in rear swingarm? Geared Bafang 750W?

Monkeypowah   1 mW

1 mW
Posts: 19
Joined: Nov 22 2017 5:04pm

Re: Your Creation's Before & After Pics

Post by Monkeypowah » Jan 30 2018 3:58pm

Its a cheap muddyfox turmoil...andcyes opened up the stays to fit fatbike hub..bafang 750W

User avatar
amberwolf   100 GW

100 GW
Posts: 25127
Joined: Aug 17 2009 6:43am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group
Contact:

Re: Your Creation's Before & After Pics

Post by amberwolf » Feb 03 2018 12:51pm

Changed the thinly-padded "bench seat" out for a suspended-mesh "bleacher chair"; much more comfy. Also, a bit before that (same page in link below), built a mount for the Kia headlight, trimmed away all the excess ugly plastics, and added a weather-sealed cover so rain won't shatter the hot bulb. At the same time, rebuilt the tiller and front lighting mounts and replaced the headset.

https://endless-sphere.com/forums/viewt ... 1#p1355550

After:
Image

Image

Image


Before (with a couple of coolers for groceries on the cargo rack):

Image

Monkeypowah   1 mW

1 mW
Posts: 19
Joined: Nov 22 2017 5:04pm

Re: Your Creation's Before & After Pics

Post by Monkeypowah » Feb 06 2018 3:38pm

Thanks for the help on the thru axle front hub, after testing in the woods, that little Bafang at 30 amps really hauls, I was easily
climbing short ,steep paths through the trees that you could never pedal up in any gear.
It powered through soft sand, even on an incline with minimal help from me.
I could even..and I know you shouldn't...start mid hill on motor alone, very impressed

Post Reply