E-bike + downhill frame + Mxus hub motor + 24s lipo

Show off your E-bike creation here.
Post Reply
User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

E-bike + downhill frame + Mxus hub motor + 24s lipo

Post by soaresdacosta » Apr 14, 2012 3:49 pm

Hello crew,

After a year collecting parts and learning with this forum... I'm going to begun my conversion...i hope. :lol:
This is meant to be a ongoing conversion...no rush :wink:
First, a especial thanks to joeFR, and is beautiful SCOOT ASPECT conversion...its been a inspiration to me, and a big help.
The big picture, its going to be: Cube analog disc 2012, size 20, Lyen 18x4115 controller, a old-school clyte 5306 and 24s 3p lippo.
Ok, some pictures:

Take care,
Luis Costa.
Attachments
20151123_164255.jpg
20151123_164255.jpg (26.5 KiB) Viewed 6037 times
DSC01210.JPG
DSC01210.JPG (72.08 KiB) Viewed 6037 times
DSC00113.JPG
DSC00113.JPG (76.52 KiB) Viewed 6037 times
DSC00125.JPG
DSC00125.JPG (75.06 KiB) Viewed 6037 times
DSC00109.JPG
DSC00109.JPG (79.56 KiB) Viewed 6037 times
DSC00108.JPG
DSC00108.JPG (76.65 KiB) Viewed 6037 times
DSC_0454.JPG
DSC_0454.JPG (104.96 KiB) Viewed 6037 times
DSC_0315.JPG
DSC_0315.JPG (90.5 KiB) Viewed 6037 times
DSC_0662.JPG
DSC_0662.JPG (102.25 KiB) Viewed 6037 times
DSC00200.JPG
DSC00200.JPG (72.84 KiB) Viewed 6037 times
DSC_0709.JPG
DSC_0709.JPG (117.07 KiB) Viewed 6037 times
DSC_0137.JPG
DSC_0137.JPG (104.98 KiB) Viewed 6037 times
DSC_0170.JPG
DSC_0170.JPG (86.72 KiB) Viewed 6037 times
DSC_0339.JPG
DSC_0339.JPG (89.35 KiB) Viewed 6037 times
DSC_1010.JPG
DSC_1010.JPG (141.86 KiB) Viewed 6037 times
DSC_0949.JPG
DSC_0949.JPG (96.94 KiB) Viewed 6037 times
DSC_0015.JPG
DSC_0015.JPG (66.96 KiB) Viewed 6037 times
DSC_0036.JPG
DSC_0036.JPG (171.55 KiB) Viewed 6037 times
DSC_0041.JPG
DSC_0041.JPG (66.53 KiB) Viewed 6037 times
DSC_0056.JPG
DSC_0056.JPG (147.31 KiB) Viewed 6037 times
Last edited by soaresdacosta on Apr 09, 2018 4:37 pm, edited 11 times in total.

User avatar
Kepler
1 GW
1 GW
Posts: 3085
Joined: Nov 08, 2009 9:22 pm
Location: Eastern suburbs Melbourne Australia

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by Kepler » Apr 14, 2012 4:04 pm

Nice looking bike. Should climb trees with that combo. Make sure you pay attention to really good torque arms on that badboy.
Current Rides

Lightest true ebike on the planet: ON ROAD https://endless-sphere.com/forums/viewt ... =6&t=74269
eBoost on facebook: http://www.facebook.com/pages/Eboost/200306283342024/
75 Volt 6 kW FUTR Beta 29'er: OFF ROAD

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » Apr 25, 2012 4:48 pm

Well...start doing something...finally. 8)
I take the Crystalyte rim out...and will put the Sun-Rim in.
I have a new set of spokes, from J.H...but they are 14/15ga. 6 months ago, when i bought this spokes i don't want to drill the rim...but this motor is real heavy, and i think i will buy some 12ga from JH.
Since the motor is out, i will open some holes in the side covers, put some black paint, and try to fit bigger fase wires.
Its a lot of work, for the free time i have... i think i need some 48hours days.

"Nice looking bike. Should climb trees with that combo. Make sure you pay attention to really good torque arms on that badboy."
Thanks Kepler.

Take care,
Luis Costa
Attachments
DSC00123.JPG
DSC00123.JPG (76.48 KiB) Viewed 13014 times
DSC00124.JPG
DSC00124.JPG (70.73 KiB) Viewed 13014 times
DSC00125.JPG
DSC00125.JPG (75.06 KiB) Viewed 13014 times

steam25
100 W
100 W
Posts: 247
Joined: Apr 09, 2012 12:55 pm
Location: Shenzhen China

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by steam25 » Apr 26, 2012 12:30 am

nooooo way!!! hahahahha :mrgreen:

dude i like your bike! especially because we are building EXACTLY same bike!

https://endless-sphere.com/forums/do ... p?id=81147

now i rided THIS for 3000km+ https://endless-sphere.com/forums/do ... &mode=view

and going to the next step: lyen controllers and crystalyte motors.
IMG_1406-2.jpg
subscribed!
feel free to contact me i can give you some good ideas for this frame :idea: :)

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » May 02, 2012 5:00 pm

Hi guys,

A little work...very little :oops:
Its the first time i build a well. Not too bad...i think. But I'm going to change the spokes, a upgrade to 12g.
I try with this ones just for practice, and, I'm glade i did it, because they are 5mm too long, and i be able to correct that on the 12g spokes I'm going to order to J.H.

I steam25, nice builds you have done, and nice bike you have for the next build... :lol:

Take care,
Luis Costa.
Attachments
DSC00126.JPG
DSC00126.JPG (82.5 KiB) Viewed 12815 times
DSC00127.JPG
DSC00127.JPG (86.12 KiB) Viewed 12815 times
DSC00128.JPG
DSC00128.JPG (85.87 KiB) Viewed 12815 times
DSC00129.JPG
DSC00129.JPG (75.13 KiB) Viewed 12815 times
DSC00130.JPG
DSC00130.JPG (85 KiB) Viewed 12815 times

User avatar
ohzee
10 MW
10 MW
Posts: 2263
Joined: Jul 20, 2011 1:13 pm
Location: Columbus Ohio USA

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by ohzee » May 02, 2012 8:33 pm

Looks like a great combination of parts. Look forward to your build.

I really like that bike looks sharp.

steam25
100 W
100 W
Posts: 247
Joined: Apr 09, 2012 12:55 pm
Location: Shenzhen China

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by steam25 » May 18, 2012 1:18 am

how is your bike going?
yesterday i finished my first test ride and go up to 94km/h with both motors at 6000W together. how much will you use on your motor?

User avatar
rojitor
100 kW
100 kW
Posts: 1061
Joined: Mar 23, 2011 6:39 pm
Location: vigo spain

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by rojitor » May 18, 2012 12:46 pm

Bem-vindo soaresdacosta, i have a 5306 too, the hell of a good torque. Good luck with your project.

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » May 19, 2012 9:43 am

"Bem-vindo soaresdacosta, i have a 5306 too..."
Gracias rojitor.
Are you happy with your 5306 ? Do you have a build page here ?
Take care.

User avatar
nonlineartom
10 kW
10 kW
Posts: 500
Joined: Apr 30, 2011 3:44 pm
Location: Bradford, UK

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by nonlineartom » May 19, 2012 4:42 pm

This build looks great. I'm in the 5306 club too. I've just this week got hold of a decent full suspension frame so as soon as I've got something to show I'll put photos up. I'm going for 24s 100A
Commuter bike: 10T MAC Schwinn Panther Beach Cruiser on 12S LiPo, super stealth hill eater
Forest trail eater: Crystalyte 5306 KMX Viper with 24" wheel. 100A controller 18S LiPo
Pocket rocket: 8T MAC e-BMX 18s LiPo. Missile for testing to destruction
Summer ride: 8T MAC Kona Joe MTB / chopper / beach cruiser hybrid bike. 24" wheels and a lot lot of style.
--------------------------------------------------------------------------------
Respect and fear the ancient god LiPo and pray he is merciful.

User avatar
rojitor
100 kW
100 kW
Posts: 1061
Joined: Mar 23, 2011 6:39 pm
Location: vigo spain

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by rojitor » May 19, 2012 6:17 pm

soaresdacosta wrote:"Bem-vindo soaresdacosta, i have a 5306 too..."
Gracias rojitor.
Are you happy with your 5306 ? Do you have a build page here ?
Take care.
yes i like it very much, i wish it were lighter nevertheless is stronger than the ht. I made several builds so far yet i am too lazy to make a build page, sooner or later i will do it. ;)

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » May 20, 2012 8:51 am

"This build looks great. I'm in the 5306 club too..."
Hi nonlineartom, I already see your videos in YouTube...5306 + trike = FUN. :D
I read you upgrade your phase wires. Whats the size, you put there ? Modifications on the axle ?

Take care.
Luis Costa.

User avatar
nonlineartom
10 kW
10 kW
Posts: 500
Joined: Apr 30, 2011 3:44 pm
Location: Bradford, UK

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by nonlineartom » May 20, 2012 12:19 pm

soaresdacosta wrote:"This build looks great. I'm in the 5306 club too..."
Hi nonlineartom, I already see your videos in YouTube...5306 + trike = FUN. :D
I read you upgrade your phase wires. Whats the size, you put there ? Modifications on the axle ?

Take care.
Luis Costa.


I got my 5306 pre-upgraded, I think they are 8 or 10 gauge phase wires with very thin teflon insulation rather than thick rubber. Tight fit out of the axle. The trike has been sold now, but I kept the 5306, thats going in my FS frame build for summer trail riding. It needs 66 or 88V to get up some heart racing speed, too slow at 44V
Commuter bike: 10T MAC Schwinn Panther Beach Cruiser on 12S LiPo, super stealth hill eater
Forest trail eater: Crystalyte 5306 KMX Viper with 24" wheel. 100A controller 18S LiPo
Pocket rocket: 8T MAC e-BMX 18s LiPo. Missile for testing to destruction
Summer ride: 8T MAC Kona Joe MTB / chopper / beach cruiser hybrid bike. 24" wheels and a lot lot of style.
--------------------------------------------------------------------------------
Respect and fear the ancient god LiPo and pray he is merciful.

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » Aug 23, 2012 3:25 pm

OK... some free time, to do some work, on the bike. :roll:
I open the motor, and going to drill the side plates.
But first, i need some tools, like a drill-press...and, since I'm doing this inside off my house, i try to put everything as clean as i can...
After the drilling i will put a temperature probe, and i will try to fit some bigger wires.
Attachments
DSC00131.JPG
DSC00131.JPG (81.12 KiB) Viewed 12334 times
DSC00132.JPG
DSC00132.JPG (77.86 KiB) Viewed 12334 times
DSC00134.JPG
DSC00134.JPG (82.45 KiB) Viewed 12334 times
DSC00136.JPG
DSC00136.JPG (89.1 KiB) Viewed 12334 times
DSC00139.JPG
DSC00139.JPG (73.89 KiB) Viewed 12334 times
DSC00144.JPG
DSC00144.JPG (76.22 KiB) Viewed 12334 times
DSC00145.JPG
one done...one to go
DSC00145.JPG (72.97 KiB) Viewed 12334 times

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » Aug 28, 2012 1:38 pm

OK, I finish drilling the first cover... :wink: The drilling, is the easy part, take measures is very boring.
One done...one to go.
Attachments
DSC00146.JPG
DSC00146.JPG (75.55 KiB) Viewed 12282 times
DSC00147.JPG
DSC00147.JPG (72.08 KiB) Viewed 12282 times

User avatar
NeilP
100 GW
100 GW
Posts: 5327
Joined: Nov 27, 2010 3:18 pm
Location: 49.17303, -2.05354 Jersey, Europe
Contact:

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by NeilP » Aug 28, 2012 1:57 pm

I used 12 gauge spokes too, on my 5304, but a lot of people seem to say that gong with the thinner spokes on a bike rim is better than the thicker spokes. if you use spokes that are to thick, you can not put enough stretch on them, and they become loose quicker. I do not know what to recommend, but just letting you know that thicker spokes is not necessarily the way to go to make a stronger wheel. Sometimes a thinner spoke under greater tension is stronger than thicker spokes.

Also having the bend of the spoke on the outside and not on the inside, is supposed to make a laterally stiffer wheel, so feed the spoke through the hole from the inside, so the nipple is inside
:) Only Irish coffee provides in a glass all four essential food groups: alcohol, caffeine, sugar, and fat :)

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » Aug 28, 2012 5:02 pm

Hi NeilP,

Well, i have 13/14 gauge black spokes, bought from J.H., and i already try them on my wheel...but i think they are to slime and the motor to heavy.
Last week i receive my 12 gauge spokes from J.H. I believe, that's the way to go...but if its not, i will change to my 13/14 gauge spokes.

Take care,
Luis Costa.
Attachments
DSC00142.JPG
DSC00142.JPG (73.19 KiB) Viewed 11855 times

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » Sep 14, 2012 8:31 am

OK, not to much work done... but i receive some toys, from H.K.
Attachments
DSC00149.JPG
DSC00149.JPG (68.67 KiB) Viewed 11822 times
DSC00150.JPG
DSC00150.JPG (83.91 KiB) Viewed 11822 times
DSC00151.JPG
DSC00151.JPG (79.81 KiB) Viewed 11822 times

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » Sep 14, 2012 8:36 am

And i receive 12ga wires, to change my phase leads.
I believe it will be OK. Or not ? Maybe try to fit 10ga wires ?

Take care,
Luis Costa.
Attachments
DSC00152.JPG
DSC00152.JPG (80.27 KiB) Viewed 11821 times

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » Oct 20, 2012 2:16 pm

Hi guys,

This build its taking to loooong... but...i finish a very boring job.
No its time for another job. Put some black color...

Take care,
Luis Costa.
Attachments
DSC_0003.JPG
DSC_0003.JPG (98.6 KiB) Viewed 11792 times
DSC_0006.JPG
DSC_0006.JPG (94.48 KiB) Viewed 11792 times
DSC_0009.JPG
DSC_0009.JPG (85.68 KiB) Viewed 11792 times
DSC_0010.JPG
DSC_0010.JPG (84.24 KiB) Viewed 11792 times

Rodney64
1 MW
1 MW
Posts: 1964
Joined: Mar 30, 2012 4:00 am
Location: Perth Western Australia

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by Rodney64 » Nov 01, 2012 4:18 pm

I'm in the process of having a 5305 laced into a rim. Hope to have it shortly. Also running 24s lipo

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » Nov 02, 2012 5:17 pm

Hi Rodney64,

I already try to lace this motor into a rim...just for practice. After i finish the "upgrades" in the motor I'm going to lace-it with 12ga spokes.
Slow process :roll:

Take care.

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » Aug 12, 2013 4:14 pm

Hi Guys,

Since life got in the way... my build stop for long time. :cry:
Now, I will try to finish my bike.

So... I finish my paint job, on the motor, put 10g wires, outside the axle i put 8g. Install a temperature probe and change the bearings.
I make some test fit on the bike, and there is some minor tuning to do...

More to come,
Luis Costa.
Attachments
DSC_0017.JPG
DSC_0017.JPG (86.37 KiB) Viewed 10704 times
DSC_0018.JPG
DSC_0018.JPG (103.69 KiB) Viewed 10704 times
DSC00167.JPG
DSC00167.JPG (97.05 KiB) Viewed 10704 times
DSC00169.JPG
DSC00169.JPG (105.46 KiB) Viewed 10704 times
DSC_0016.JPG
DSC_0016.JPG (98.46 KiB) Viewed 10704 times

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » Aug 12, 2013 4:24 pm

In the meantime. I receive some parts.

A mid-mount for the cycle-analyst,
A power-supply,
The charger,
And the first four, of twelve batteries. Every cell, arrive at 3.81 / 3.82.

The next step...torque-arms.

Take care,
Luis Costa.
Attachments
DSC_0020.JPG
DSC_0020.JPG (78.52 KiB) Viewed 10701 times
DSC00160.JPG
DSC00160.JPG (76.28 KiB) Viewed 10701 times
DSC00154.JPG
DSC00154.JPG (85.73 KiB) Viewed 10701 times
DSC00156.JPG
DSC00156.JPG (88.8 KiB) Viewed 10701 times
DSC00162.JPG
DSC00162.JPG (74.08 KiB) Viewed 10701 times
DSC00163.JPG
DSC00163.JPG (69.73 KiB) Viewed 10701 times
DSC00164.JPG
DSC00164.JPG (89.03 KiB) Viewed 10701 times

User avatar
soaresdacosta
1 kW
1 kW
Posts: 442
Joined: Jan 26, 2011 12:08 pm
Location: Portugal / Europe

Re: CUBE + Clyte 5306 + 18x4115 controller

Post by soaresdacosta » Sep 24, 2013 3:59 pm

Hi guys,

Its time to make a batteries box. In my Country (PORTUGAL), its hard times on the economics... :cry: so, its hard to find a company, for make some customs parts. I find one, and they are make-me a very big favor, for building an aluminium box for me, for the modest price of 400€ :shock: :shock: wtf...
So, i buy some acrylic and start to build my one. Well, its not easy, but not very hard, its very time consuming.

Take care,
Luis Costa.
Attachments
DSC00176.JPG
DSC00176.JPG (75.5 KiB) Viewed 10458 times
DSC00178.JPG
DSC00178.JPG (92.62 KiB) Viewed 10458 times
DSC00182.JPG
DSC00182.JPG (86.96 KiB) Viewed 10458 times
DSC00183.JPG
DSC00183.JPG (74.44 KiB) Viewed 10458 times
DSC00184.JPG
DSC00184.JPG (82.6 KiB) Viewed 10458 times

Post Reply