E-S Phasor Electric Bike Owners
-
- Posts: 39
- Joined: May 20 2014 8:55pm
- Contact:
Re: E-S Phasor Electric Bike Owners
Here is my Phasor Build. I do have to say that I have a Greyborg and a Raptor, plus about 4 other electric bikes along with a 2WD Yuba Mundo. This Phasor is a thing of beauty. I cannot say enough good about it. David designed a piece of E-Bike art! I did have to use a hydraulic cylinder to spread the swingarm a little to get the clearance for the CRO motor. I made a few spacers. Clamped the motor wires with a hose clamp covered with heatshrink...better than trusting a zip tie with 116volts at 100 amp! haven't turned it up past 25 amps yet...but it will do 30+ mph easy so far. Pretty light and nimble. like the thin frame. I mounted the Lyen controller to the top of the frame and used 2, 58 volt High Power cycle Batteries. The toggle switch is for series / parallel of the batteries.
- Attachments
-
- p3.jpg (214.5 KiB) Viewed 2874 times
-
- p4.jpg (217.49 KiB) Viewed 797 times
-
- p5.jpg (201.32 KiB) Viewed 797 times
-
- p6.jpg (145.69 KiB) Viewed 797 times
-
- p7.jpg (172.74 KiB) Viewed 668 times
Phasor....108 Volt 100 AMP Cromotor
Raptor........108 Volt 100 Amp CroMotor
Greyborg....84 Volt 60 Amp HPC 3500 Watt
Raptor........108 Volt 100 Amp CroMotor
Greyborg....84 Volt 60 Amp HPC 3500 Watt
Re: E-S Phasor Electric Bike Owners
Jerry Of The Woods, very nice build. I always like that color of Green on the Phasors. Your build is top notch. Man you got a lot of ebikes there. I feel like Grasshopper to the mighty Shaolin preist compared to you. Planning on making any videos, would like to see your machines in action.
-
- Posts: 39
- Joined: May 20 2014 8:55pm
- Contact:
Re: E-S Phasor Electric Bike Owners
Thanks for the kind words Grasshopper. I am just a beginner that is facinated by these machines. I sure have learned a bundle on here. I may just put my Gopro on my next ride!
Phasor....108 Volt 100 AMP Cromotor
Raptor........108 Volt 100 Amp CroMotor
Greyborg....84 Volt 60 Amp HPC 3500 Watt
Raptor........108 Volt 100 Amp CroMotor
Greyborg....84 Volt 60 Amp HPC 3500 Watt
Re: E-S Phasor Electric Bike Owners
Sure hope so, look forward to seeing it.jerrydubois3 wrote:Thanks for the kind words Grasshopper. I am just a beginner that is facinated by these machines. I sure have learned a bundle on here. I may just put my Gopro on my next ride!
Re: E-S Phasor Electric Bike Owners
Hello my fellow Phasor freaks, love all the new Phasor builds especially the Cromotors. Wingsuit your bike is beautiful! I Got my bike back from Ilia, EbikeSF. Freaky fast! Running at 126 volts hot off the charger, with BMS built by Ilia. 62 mph so far, on a slight uphill with the Cromotor. My regen braking is awesome.
It weighs 120 lbs Lyen 24 fet controller.
Yamaha playbike rim in the rear with Shinko 90mph, DOT rated MC tire.


Last edited by Kike Ming on Sep 26 2014 4:09pm, edited 4 times in total.
Re: E-S Phasor Electric Bike Owners
Actually 126.6v, hot off the charger. Just saying! 

Re: E-S Phasor Electric Bike Owners
Shout out to Rodney who started this site. Hope you and the family are well. My bike's really fast because of you. 

Re: E-S Phasor Electric Bike Owners
Big disk brakes and 85/34 Tooth schlumpft drive. 120v, Cromotor! 

Re: E-S Phasor Electric Bike Owners
Thanks Kike for posting the pic. All's good at my camp and family are all well. Good to see what others are doing with there Phasors. My phasor also running a 24 fet and currently 24s lipo.Kike Ming wrote:Big disk brakes and 85/34 Tooth schlumpft drive. 120v, Cromotor!
Re: E-S Phasor Electric Bike Owners
Ebikes are the future! We need more Phasor's. I did 40 miles on my bike today averaging 37mph with hills. Much thanks to my E-wizard Ilia Borouk at EbikesSF, on Ocean in San Francisco. A dedicated Ebike shop.



Re: E-S Phasor Electric Bike Owners
Very nice Mike, you machine is a ripper! Any vids coming down the pipe?Kike Ming wrote:Big disk brakes and 85/34 Tooth schlumpft drive. 120v, Cromotor!
Re: E-S Phasor Electric Bike Owners
Yes getting to know my new GoPro. My friends an expert. He's helping. Soon brother! 

Re: E-S Phasor Electric Bike Owners
Sweet Mike, can't wait to see some 62MPH fly byes.Kike Ming wrote:Yes getting to know my new GoPro. My friends an expert. He's helping. Soon brother!
Re: E-S Phasor Electric Bike Owners
Too many bikes, naw, never. Did about 38 miles today on the Phasor. Running between 35mph and 55mph with some long hills. I was even running in my middle setting on my V3 cycle analyst. Never got near my temp gauge shut off, of 125C. It stayed down around 95C at it's highest. My high setting is much faster, too fast. plus the Cromotor gets much hotter on the high setting. Only 5 to 6 miles before hitting 115C. I think it will do 65-70mph! But I want wait and try it under controlled conditions. With witnesses and video.
Almost charged at 126.4 volts.

Re: E-S Phasor Electric Bike Owners
Actually when one reads here at the Stealth thread I often think about the cost of the Stealth plus the cost of all the changes Stealth riders make to thier bikes.It makes me think,heck just get a Phasor frame and put together your dream bike for much less.Kike Ming wrote:Ebikes are the future! We need more Phasor's. I did 40 miles on my bike today averaging 37mph with hills. Much thanks to my E-wizard Ilia Borouk at EbikesSF, on Ocean in San Francisco. A dedicated Ebike shop.![]()
Of course to be fair not many knew ahead what they wanted.
Tim
Re: E-S Phasor Electric Bike Owners
I would love to build my own bike. But phasor design is not for me. Raptor is nice but way to bulky compared to a Fighter. So A Raptor frame compact as Fighter=shut up and take my money!
Join Endless-Sphere Telegram group: https://t.me/endless_sphere
Sur-Ron Dealer Europe SE
Sur-Ron Dealer Europe ENG
Sur-Ron Dealer Europe SE
Sur-Ron Dealer Europe ENG
Re: E-S Phasor Electric Bike Owners
how many teeth on the back?..also u have close up of chain tensioner?Kike Ming wrote:Big disk brakes and 85/34 Tooth schlumpft drive. 120v, Cromotor!
Re: E-S Phasor Electric Bike Owners
well I blew out my suck ass crystalyte controller for the third or forth time!!!...if I wanna run over 100 volts at say 5000 watts what the best controller? was thinking lyen 18 fet
Re: E-S Phasor Electric Bike Owners
Korpin how anout trying one of the greentime ones. 36 fet 4115.
Re: E-S Phasor Electric Bike Owners
Why not adaptto?
How many turns you got on the motor?
you can do 110km/h with 4turn motors and only 84volts that will be around 11kW.
How many turns you got on the motor?
you can do 110km/h with 4turn motors and only 84volts that will be around 11kW.
Last edited by Allex on Oct 03 2014 3:38am, edited 1 time in total.
Join Endless-Sphere Telegram group: https://t.me/endless_sphere
Sur-Ron Dealer Europe SE
Sur-Ron Dealer Europe ENG
Sur-Ron Dealer Europe SE
Sur-Ron Dealer Europe ENG
Re: E-S Phasor Electric Bike Owners
I'm going adappto Kopin. You'll need a new battery though
Re: E-S Phasor Electric Bike Owners
Rodney64 wrote:Korpin how anout trying one of the greentime ones. 36 fet 4115.
hmm what are the dimensions?..and cost?...link?
-
- Posts: 41
- Joined: Feb 11 2013 6:12am
Re: E-S Phasor Electric Bike Owners
Hey Guys,
Sorry to break up the thread but this is kinda Phasor related. I am parting out my Phasor
as i move to the Eastern States for work soon, so i thought i would let you guys know just in case you need parts or anything. here is a list of what is still available at the moment.
PARTS FOR SALE ARE:
Frame - Phasor Cycles electric green Ebike frame 200mm dropouts $2200 SOLD Pending payment (suits crow motor)
Motor - Crystalyte Rear Crown MTC80R26 laced to a 14" downhill rim provided by Hyena
Controller - Crystalyte 100v 18fet standard direct drive motor controller
Throttle - Standard half twist throttle
Also have a CA version 3 that i will through in.
The motor, controller and throttle are all brand new and haven't even seen the light of day yet as i went with a crow instead so they just sat in their boxes.
I'm not trying to make money here only trying to make some of the money back that i have spent.
pm me for prices and shipping costs.
Cheers
Daniel
Sorry to break up the thread but this is kinda Phasor related. I am parting out my Phasor

PARTS FOR SALE ARE:
Frame - Phasor Cycles electric green Ebike frame 200mm dropouts $2200 SOLD Pending payment (suits crow motor)
Motor - Crystalyte Rear Crown MTC80R26 laced to a 14" downhill rim provided by Hyena
Controller - Crystalyte 100v 18fet standard direct drive motor controller
Throttle - Standard half twist throttle
Also have a CA version 3 that i will through in.
The motor, controller and throttle are all brand new and haven't even seen the light of day yet as i went with a crow instead so they just sat in their boxes.
I'm not trying to make money here only trying to make some of the money back that i have spent.
pm me for prices and shipping costs.
Cheers
Daniel
Re: E-S Phasor Electric Bike Owners
I might be selling my phasor...going to put in a new battery pack and controller before I sell...it runs excellent but thinking of building a mid drive to climb better not sure what kind of frame I am going to use either phasor or HPC frame if they ever build it has shlumph and great motor cycle wheels
Re: E-S Phasor Electric Bike Owners
So I love all Ebikes, but Phasors are the best! I put some video ( very shaky and bad on Youtube under) fastest electric bicycle in the world , Super fast or find my channel under Kike Ming. Phasor frame 120v battery, 126.9 volts hot off the charger, 24 fet Lyen controller, 10,000w Cromotor. 67 MPH top
speed
Frick, yah, ride or Eletric or die!

