litespeed wrote:So oldhaq,
What's the motor like now compared to factory? Bottom torque? Top speed? Enough to keep the front end light? How about efficiency? Amp sucker or sipper?
pretty towey, seemed to handle the power i was feeding it without a worry, had the 24 fet cranked up to 150 batt amps and 250 phase, and disabled the over-current protection circuit cos it was stuttering under heavy load no matter what settings or controller type I set it too. It was a scream and made my regular little test track too short now to open it right up. Gotta stay forward or it Will flip.
I was surprised that even after a good hour of riding I only had to put 6.5ah back in.
Top speed is probably about 5-10kmh slower on 22s, Id guess about 55-60 kmh.
It is also a bit quieter in that it has resonates differently now, the 7 wind had more vibration
Trackman417 wrote:What is this? Where are the pics, the videos That you have promised us
Hope all is well mate
I'm going to start winding this weekend.... Hopefully. I have two spools of copper wire. And I want 10 strands of the stuff. Do you recommend wrapping wire around two poles 5 times cutting it at bother ends and winding all the wires together?
If you don't understand what I just said.... How did you set up your wire for winding? Lol
Having drama trying to convert the .mov video from a pos iphone, I'll try to get something up soon. It's not all good though, you'll see why...
I put 2 sticks in the ground 15.5 metres apart, and made 4 loops to give me 8 lengths. you only need to cut after the final loop - just twist all together at the corner at stick. So I had effectively a 15.5 metre multistranded wire with 8 strands in it. I then just wound this 15.5m long wire onto a large upside down bucket to keep it neat.