mushymelon
1 kW
I picked up a strong electric bike for a few dollars used. Looks like there will be lots of room for lipo. Its a bit of a strange design but the frame is steel and i plan on beefing up the weld in certain areas. The hardware is shit and some looks custom like the extra wide crank. No sure where im going to find parts for that. Im planning on using a golden motor I have for this project. Im also going to use downhill front forks and upgrade rear shock. Im thinkin 2.5 hookworms 24 or 26".
A few questions
How much power can the golden motor take without upgrading the wires. Currently runs 1500 watts and 31 amps peak with no heat issues. I would like to go 70, 90v lipo. 15 to 20 ah
Whats the best bang for the buck in lipo currently. Chargers too.
what controller would you recommend in a small form factor that can handle 70 90v 40 to 50 amps Im hoping to get 35 to 40 mph
Unique torque arms
Anyone recognize this motor Z logo on it.
A few questions
How much power can the golden motor take without upgrading the wires. Currently runs 1500 watts and 31 amps peak with no heat issues. I would like to go 70, 90v lipo. 15 to 20 ah
Whats the best bang for the buck in lipo currently. Chargers too.
what controller would you recommend in a small form factor that can handle 70 90v 40 to 50 amps Im hoping to get 35 to 40 mph
Unique torque arms
Anyone recognize this motor Z logo on it.