Vector bike and frame owners.

Show off your E-bike creation here.
User avatar
pucksterpete   1 kW

1 kW
Posts: 329
Joined: Apr 15 2011 11:11am
Location: Paris France
Contact:

Re: Vector bike and frame owners.

Post by pucksterpete » Mar 10 2019 12:30pm

N3mam wrote:
Feb 25 2019 12:51am
It looks like mudhugger https://www.themudhugger.eu/shop
Here were the latest look with both mudguards & covers vinyl wrapped, still getting mud up my back with the mudhugger

Image
Image
Image
Image
Image
Image
Image
upload pic
Optim Alp Hardtail with MXUS Motor
20S 2P Turnigy 5.0 Hard Case
Top speed 38mph tops :)
Hyena Special
http://endless-sphere.com/forums/viewto ... 97#p585997
-------
Excelsior/Strong GTS with Cromotor
24S 3P Turnigy 5.0 Hard Case
Top speed so far 53mph
http://endless-sphere.com/forums/viewto ... =6&t=46993

Cuprani   10 mW

10 mW
Posts: 22
Joined: Jan 14 2019 1:56pm

Re: Vector bike and frame owners.

Post by Cuprani » Mar 11 2019 10:59am

Does anyone have experience with this stand on the Vector frame?

Image

https://nl.aliexpress.com/item/2017-New ... 3c00cnHuME

User avatar
madin88   100 MW

100 MW
Posts: 2947
Joined: May 27 2013 2:02am
Location: Austria

Re: Vector bike and frame owners.

Post by madin88 » Mar 13 2019 5:17am

Cuprani wrote:
Mar 11 2019 10:59am
Does anyone have experience with this stand on the Vector frame?
This kickstand looks similar as the one i bought for my vectors:

https://endless-sphere.com/forums/viewt ... d#p1310291

34.jpg
34.jpg (224.46 KiB) Viewed 1133 times
If it does fit straightaway depends on your crank and frame geometry (fork length, damper position).
It could be that you have to drill another hole into the bottom bracket, or in the very worst case to add a V-shape plate between kickstand and frame.

btw: for those who have a broken stand from Vector, a nice repair would be to use 14/18mm aluminum tube and a plastic foot from KTM:

11.jpg
11.jpg (277.59 KiB) Viewed 1133 times

User avatar
pucksterpete   1 kW

1 kW
Posts: 329
Joined: Apr 15 2011 11:11am
Location: Paris France
Contact:

Re: Vector bike and frame owners.

Post by pucksterpete » Mar 28 2019 10:28am

Does anyone have an Android link to a Xiaoxiang bms bluetooth software or better yet by looking at the pic below, a link to this very software?
Image
mettre une image sur internet
Optim Alp Hardtail with MXUS Motor
20S 2P Turnigy 5.0 Hard Case
Top speed 38mph tops :)
Hyena Special
http://endless-sphere.com/forums/viewto ... 97#p585997
-------
Excelsior/Strong GTS with Cromotor
24S 3P Turnigy 5.0 Hard Case
Top speed so far 53mph
http://endless-sphere.com/forums/viewto ... =6&t=46993

User avatar
pucksterpete   1 kW

1 kW
Posts: 329
Joined: Apr 15 2011 11:11am
Location: Paris France
Contact:

Re: Vector bike and frame owners.

Post by pucksterpete » Mar 28 2019 10:30am

Latest photos of some other covers wrapped

Image
Image
Image
Optim Alp Hardtail with MXUS Motor
20S 2P Turnigy 5.0 Hard Case
Top speed 38mph tops :)
Hyena Special
http://endless-sphere.com/forums/viewto ... 97#p585997
-------
Excelsior/Strong GTS with Cromotor
24S 3P Turnigy 5.0 Hard Case
Top speed so far 53mph
http://endless-sphere.com/forums/viewto ... =6&t=46993

User avatar
Artur   100 kW

100 kW
Posts: 1079
Joined: Jul 03 2014 3:29am

Re: Vector bike and frame owners.

Post by Artur » Mar 28 2019 10:33am


User avatar
DasDouble   100 kW

100 kW
Posts: 1152
Joined: Jul 12 2015 1:35pm
Location: GERMANIA :D

Re: Vector bike and frame owners.

Post by DasDouble » Apr 08 2019 2:56am

Bg-electric-cycle wrote:
Mar 09 2019 8:50am
Anyone fitted 20s 20p within a Vector Typhoon frame. Actual fact fit 424 cells 20s 21p.

Only ask given I’d like some sort of metal containment. Either a complete box or half open one.

The cells in their holders appear a snug fit and unsure if the metal work of a box of does increase the size to a point were the ABC side wings be prevented from installation?

And yes, the blocks will have insulation between them. :D
I got a 20s15p pack inside it. But I have some air left on the seat side
Mechatronics-Engineering Student
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

Scibomber420   1 µW

1 µW
Posts: 4
Joined: Apr 09 2019 10:04pm

Re: Vector bike and frame owners.

Post by Scibomber420 » Jun 16 2019 12:48pm

Bg-electric-cycle wrote:
Mar 09 2019 8:50am
Anyone fitted 20s 20p within a Vector Typhoon frame. Actual fact fit 424 cells 20s 21p.

Only ask given I’d like some sort of metal containment. Either a complete box or half open one.

The cells in their holders appear a snug fit and unsure if the metal work of a box of does increase the size to a point were the ABC side wings be prevented from installation?

And yes, the blocks will have insulation between them. :D

26s16p. 96v 48ah 30q cells. Still a work in progress. Thought this might help. Biggest battery I was able to configure into my new vector typhoon frame.

Scibomber420   1 µW

1 µW
Posts: 4
Joined: Apr 09 2019 10:04pm

Re: Vector bike and frame owners.

Post by Scibomber420 » Jun 18 2019 5:25pm

26s16p 30q vector pack.jpeg
capable of 200amp which only compression connectors, no solder 2/0awg main to sabvoton 96120 for now.
26s16p 30q vector pack.jpeg (88.12 KiB) Viewed 706 times
Scibomber420 wrote:
Jun 16 2019 12:48pm
Bg-electric-cycle wrote:
Mar 09 2019 8:50am
Anyone fitted 20s 20p within a Vector Typhoon frame. Actual fact fit 424 cells 20s 21p.

Only ask given I’d like some sort of metal containment. Either a complete box or half open one.

The cells in their holders appear a snug fit and unsure if the metal work of a box of does increase the size to a point were the ABC side wings be prevented from installation?

And yes, the blocks will have insulation between them. :D

26s16p. 96v 48ah 30q cells. Still a work in progress. Thought this might help. Biggest battery I was able to configure into my new vector typhoon frame.

User avatar
Overclocker   10 kW

10 kW
Posts: 611
Joined: Mar 17 2014 5:48am
Location: Philippines

Re: Vector bike and frame owners.

Post by Overclocker » Jun 24 2019 6:04am

Image

17s6p 18650 pack will fit in the Vector Light frame?

Volts   1 W

1 W
Posts: 52
Joined: Feb 12 2013 8:13am

Re: Vector bike and frame owners.

Post by Volts » Jul 27 2019 3:51am

Any Vortex frame owners care to share their review of he frame?

User avatar
Artur   100 kW

100 kW
Posts: 1079
Joined: Jul 03 2014 3:29am

Re: Vector bike and frame owners.

Post by Artur » Jul 27 2019 5:47am

i beleave we have sold over 30 frames so far for Vortex. but many people contact me by email. not from forum

John1deere   1 W

1 W
Posts: 59
Joined: Jul 09 2018 2:54pm

Re: Vector bike and frame owners.

Post by John1deere » Jul 27 2019 10:49pm

Volts wrote:
Jul 27 2019 3:51am
Any Vortex frame owners care to share their review of he frame?
i got one. its heavy. i dont know about other frames but mine fully dressed its 200 pounds(thats "custom" i dont use their battery or controller). still handles great and its definitely solid. at 72v and 20 000+ watts i really have no use of any sprocket except the smallest. gives me 80 km/h top speed fully charged. cant really say anything negative on the bike itself but it did takes over 7 weeks of manufacture and another 2 weeks to ship it when i was told i would have it within 4 weeks so that kinda sucked.

Volts   1 W

1 W
Posts: 52
Joined: Feb 12 2013 8:13am

Re: Vector bike and frame owners.

Post by Volts » Jul 28 2019 12:55am

What motor fits the vortex?

John1deere   1 W

1 W
Posts: 59
Joined: Jul 09 2018 2:54pm

Re: Vector bike and frame owners.

Post by John1deere » Jul 28 2019 1:00am

Volts wrote:
Jul 28 2019 12:55am
What motor fits the vortex?
qs205

User avatar
Artur   100 kW

100 kW
Posts: 1079
Joined: Jul 03 2014 3:29am

Re: Vector bike and frame owners.

Post by Artur » Jul 28 2019 1:29am

John1deere wrote:
Jul 27 2019 10:49pm
Volts wrote:
Jul 27 2019 3:51am
Any Vortex frame owners care to share their review of he frame?
i got one. its heavy. i dont know about other frames but mine fully dressed its 200 pounds(thats "custom" i dont use their battery or controller). still handles great and its definitely solid. at 72v and 20 000+ watts i really have no use of any sprocket except the smallest. gives me 80 km/h top speed fully charged. cant really say anything negative on the bike itself but it did takes over 7 weeks of manufacture and another 2 weeks to ship it when i was told i would have it within 4 weeks so that kinda sucked.
Thank you for feedback, we will try to have some basic colors in stock, so if you order black for example we can send right away, like we did with Typhoon frame for example.

User avatar
Artur   100 kW

100 kW
Posts: 1079
Joined: Jul 03 2014 3:29am

Re: Vector bike and frame owners.

Post by Artur » Jul 28 2019 1:30am

Volts wrote:
Jul 28 2019 12:55am
What motor fits the vortex?
We use 205motor with custom made side covers.

Volts   1 W

1 W
Posts: 52
Joined: Feb 12 2013 8:13am

Re: Vector bike and frame owners.

Post by Volts » Jul 28 2019 7:54am

By custom do you mean you turn the spoke holes of or is it completely new design compared to the factory?

User avatar
Artur   100 kW

100 kW
Posts: 1079
Joined: Jul 03 2014 3:29am

Re: Vector bike and frame owners.

Post by Artur » Jul 28 2019 12:41pm

More metal and bolting point for the sprocket

snejky   1 W

1 W
Posts: 57
Joined: Jun 02 2015 11:49pm

Re: Vector bike and frame owners.

Post by snejky » Jul 30 2019 2:35am

Is there a chance or procedure to get EU street legal Vortex bike?

Volts   1 W

1 W
Posts: 52
Joined: Feb 12 2013 8:13am

Re: Vector bike and frame owners.

Post by Volts » Jul 30 2019 3:20am

How wide is the battery compartment for the vortex?

User avatar
Artur   100 kW

100 kW
Posts: 1079
Joined: Jul 03 2014 3:29am

Re: Vector bike and frame owners.

Post by Artur » Jul 30 2019 5:21am

Volts wrote:
Jul 30 2019 3:20am
How wide is the battery compartment for the vortex?
I think 17.5cm. PM me if it is critical

User avatar
Artur   100 kW

100 kW
Posts: 1079
Joined: Jul 03 2014 3:29am

Re: Vector bike and frame owners.

Post by Artur » Jul 30 2019 5:21am

snejky wrote:
Jul 30 2019 2:35am
Is there a chance or procedure to get EU street legal Vortex bike?
In germany you can now buy a sticker and ride it legally 20km/h in a city. I dont know about other countries.

snejky   1 W

1 W
Posts: 57
Joined: Jun 02 2015 11:49pm

Re: Vector bike and frame owners.

Post by snejky » Jul 30 2019 5:25am

Interesting. Can you share more informations about that?

User avatar
Artur   100 kW

100 kW
Posts: 1079
Joined: Jul 03 2014 3:29am

Re: Vector bike and frame owners.

Post by Artur » Jul 30 2019 6:34am

Search in youtube number plate sticker for e-scooters. Basically it was illegal before to have something that goes faster 7kmh without PAS.. and now it is legal if you buy this insurance to go 20kmh

Post Reply