Hello guys,
few months ago I finished my second build: e-bike based on Norco A-Line 2009 frame.
Specs:
- MXUS 3000 V3 4T motor
- Adaptto Midi-E controller
- 18s MultiStar (16 Ah) lipo battery (3 packs in seriers)
- Custom CNCed dropouts (steel, 15mm width, 1 kg weight for both pieces)
- Geared HammerSchmidt FR crankset with 42t chainring. With 1.6x overdrive this creates virtual 67.2t chainring
I am very satisfied how bike performs. Acceleration is very nice and so is the handling (even with 6.5 kg battery mounted on the front fork).
Photos:
few months ago I finished my second build: e-bike based on Norco A-Line 2009 frame.
Specs:
- MXUS 3000 V3 4T motor
- Adaptto Midi-E controller
- 18s MultiStar (16 Ah) lipo battery (3 packs in seriers)
- Custom CNCed dropouts (steel, 15mm width, 1 kg weight for both pieces)
- Geared HammerSchmidt FR crankset with 42t chainring. With 1.6x overdrive this creates virtual 67.2t chainring
I am very satisfied how bike performs. Acceleration is very nice and so is the handling (even with 6.5 kg battery mounted on the front fork).
Photos: