116V Enduro Racer 70mph Get Rekt'd

evolutiongts

10 kW
Joined
Dec 31, 2013
Messages
778
Location
Alhambra, CA
More or less what I have been building for a year and half now.

17884070_10208779479420414_1802893587958970295_n.jpg


[youtube]Z-4H8xkkXyY[/youtube]

[youtube]BQ065GN4iXU[/youtube]

Specs:

Enduro Frame
MXUS 3000W 3T
Sabvoton 96V100A unlocked running @150A, Variable Regen.
CAV3
103V 26AH Lipo (Multistars)
17" Moto Front
16" Moto Rear
 
Nice build! Just needs a bit more mid range and top end to pull the Harleys harder next time!
 
rip grom.

[youtube]7MxfsduC0RA[/youtube]

Btw how come u don't get a light that would mount to the front suspension instead ? Like this

http://eastgem.net/fairing-02.html
 
Why pedals?
 
Needs more motor! MXUS is mostly just making heat >10kw. Why not run a QS 205 50? With the voltage you're running something like a 5t wind would be about right.

Nice vids man. I've had the 'how many CC?' question a few times, always funny.
 
Got a QS 205 on the way, the MXUS is useless. Gets hot too easily.
 
evolutiongts said:
Got a QS 205 on the way, the MXUS is useless. Gets hot too easily.

Haha, good man. Thought you might come back with a thesis on why the MXUS 3k is gods gift to the world. What winding did you go with?

The only other motor that's very much of interest at the moment is the MXUS 5k - 225mm x 55mm stator. Not sure if anybody has actually posted any comparative data yet, but on paper it sounds good.
 
MXUS 3K Turbo is good for 4KW-6KW builds, but at the levels I'm running at, meh.

I went with a QS 3.5T
 
Back
Top