hypertoric_amplituhedron
100 W
Here's some progress on my ebike. It's slowly coming to life. Some specs:
2017 Raleigh Talus 1 , 19" , 27.5 wheel
Edge 1500w , 11.46kv , 26" rim
24s10p GA (maybe an 11p) , 89v 35ah , 2.4 kwh useable
12 fet 40a controller , 3~4 kw capable
-------------------------
My initial plan was to build a single motor ebike. But, I just can't get the idea of a 2wd ebike out of my mind.
So, I've been doing a bit of research here, and I believe I can actually do it. The battery can supply the current for 5~6 kw burst, enough for two motors.
I hear there's a drag racing application to it. Well, I'm down, where do I sign up? That's how I built my car, and it's definitely what I would want out of my ebike, lol.
I'll probably do the two controllers joined by the signal wire, to one throttle. I'm not sure what front/rear bias is best (as far as power output), but I'm thinking 40/60. What do you think? I might just do 2 thumb throttles, but I like half-twist better.
My main issue is trying to find a 1500w front hub motor (100mm axle) with a 6-bolt disc mount. I can't seem to find one. Would a seller be willing to modify a rear hub motor for the front, retaining the disc brake option? I haven't asked anyone yet, but it seems to be a DIY project. Maybe someone knows .....
---------------------------------
Some pics of the battery housing and misc:
Skycraft. Yes, that really is a ufo flying saucer on top of the entrance. You could probably build a working one, with all of the stuff in this place.
2017 Raleigh Talus 1 , 19" , 27.5 wheel
Edge 1500w , 11.46kv , 26" rim
24s10p GA (maybe an 11p) , 89v 35ah , 2.4 kwh useable
12 fet 40a controller , 3~4 kw capable
-------------------------
My initial plan was to build a single motor ebike. But, I just can't get the idea of a 2wd ebike out of my mind.
So, I've been doing a bit of research here, and I believe I can actually do it. The battery can supply the current for 5~6 kw burst, enough for two motors.
I hear there's a drag racing application to it. Well, I'm down, where do I sign up? That's how I built my car, and it's definitely what I would want out of my ebike, lol.
I'll probably do the two controllers joined by the signal wire, to one throttle. I'm not sure what front/rear bias is best (as far as power output), but I'm thinking 40/60. What do you think? I might just do 2 thumb throttles, but I like half-twist better.
My main issue is trying to find a 1500w front hub motor (100mm axle) with a 6-bolt disc mount. I can't seem to find one. Would a seller be willing to modify a rear hub motor for the front, retaining the disc brake option? I haven't asked anyone yet, but it seems to be a DIY project. Maybe someone knows .....
---------------------------------
Some pics of the battery housing and misc:
Skycraft. Yes, that really is a ufo flying saucer on top of the entrance. You could probably build a working one, with all of the stuff in this place.