I am in love with those graphene packs, really low voltage drop at high current and 99% of the time they could deliver more current than labled.
I ordered 19 of them and one is for testing/drone.
I was able to pull 220 amps from the pack for 2 mins straight without any increase in heat , at 100 amps pull the volt supply of a full pack is 16.3v , compared to turnigy nanotech packs under the same load i was looking at 15.7 drop on 100a, the test is using a castle creation esc and motor with direct logging, not the most accurate but good enough for me.
I got the wirring harness from cowardlyduck's ebay, cant comment on performance but the quality looks top notch and he helped me alot.
Now i could chose between whatever configuration.
24s/20s/16s/12s 4p/3p/2p/1p which is really nice, hopefully i will get another for my light bike build.
What i initially have in mind is 24s3p, 100v 30ah.
Will see how good the performance is and might end up ordering 6 more of these cells for more range, will try to fit as many as possible in the frame.
Recieved the lipos for the heavy bike, 18 4s lipos from hobbyking