stromer st1 v how tight should the rear nuts be?

electricfun

10 µW
Joined
Mar 15, 2018
Messages
6
Location
Toronto, Ontario
The BMC guide that came with the bike says 40 nm... for some reason this does not seem right to me. Right now I have each lug tightened to 20 nm on my buddies bike and it seems to be giving too much power/kick...something is wrong here. Same on my st1 platinum... 20 nm per nut seems too tight..

I see all sorts of info for the st1x and st2 rear wheel but not the st1 that I have or my friends'
 
Nut tightness is for holding the motor on the frame without destroying the frame from it coming loose and twisting the frame apart.

It isn't for adjusting power. (that's what the computer system does)
 
Tight enough that the wheel doesn't fall off...... Sorry, my Tourette's took over before my conscience could intervene. :D
 
Back
Top