what is the ignition cable on the LSB30

T

tucatoledo

1 µW

Joined

Dec 6, 2019

Messages

2

• Dec 6, 2019

• #1

Plaese, I coud not identify the ignicion cable on the controller 60V. Can you help me or e-mail me a manual?

 

M

mark5

100 kW

Joined

Dec 28, 2011

Messages

1,391

Location

USA

• Dec 6, 2019

• #2

It's the thinner wire on the "power & electric lock" connector in your picture.
See Re: XLD Brainpower motor controller XunLiDa by philf.

 

T

tucatoledo

1 µW

Joined

Dec 6, 2019

Messages

2

• Dec 6, 2019

• #3

I sent you a wrong picture. My controller has lose cables as on the pictures beow. Is the orange cable the ignicion one? do I connect it on red cable to turn the controller on? Thank you for your help.

 

M

mark5

100 kW

Joined

Dec 28, 2011

Messages

1,391

Location

USA

• Dec 6, 2019

• #4

It should be. It was the orange wire on philf's controller. More so if every other connector is intact on yours except for the black, red, & orange wires in your picture.

 

V

Voltron

1 MW

Joined

May 2, 2013

Messages

2,803

Location

Santa Barbara CA

• Dec 8, 2019

• #5

It's better to run it thru a switch, then to the battery.. or else the controller will be on all the time unless you unplug it every time.