what is the ignition cable on the LSB30

General Discussion about electric vehicles.
Post Reply
tucatoledo   1 µW

1 µW
Posts: 2
Joined: Dec 06 2019 4:07pm

what is the ignition cable on the LSB30

Post by tucatoledo » Dec 06 2019 4:13pm

Plaese, I coud not identify the ignicion cable on the controller 60V. Can you help me or e-mail me a manual?
mapa controller.jpg
mapa controller.jpg (94.59 KiB) Viewed 363 times

mark5   100 kW

100 kW
Posts: 1295
Joined: Dec 28 2011 9:26pm
Location: USA

Re: what is the ignition cable on the LSB30

Post by mark5 » Dec 06 2019 4:23pm

It's the thinner wire on the "power & electric lock" connector in your picture.
See Re: XLD Brainpower motor controller XunLiDa by philf.

tucatoledo   1 µW

1 µW
Posts: 2
Joined: Dec 06 2019 4:07pm

Re: what is the ignition cable on the LSB30

Post by tucatoledo » Dec 06 2019 4:37pm

I sent you a wrong picture. My controller has lose cables as on the pictures beow. Is the orange cable the ignicion one? do I connect it on red cable to turn the controller on? Thank you for your help.
controler.jpeg
controler.jpeg (144.43 KiB) Viewed 358 times

mark5   100 kW

100 kW
Posts: 1295
Joined: Dec 28 2011 9:26pm
Location: USA

Re: what is the ignition cable on the LSB30

Post by mark5 » Dec 06 2019 4:46pm

It should be. It was the orange wire on philf's controller. More so if every other connector is intact on yours except for the black, red, & orange wires in your picture.

Voltron   10 MW

10 MW
Posts: 2148
Joined: May 02 2013 4:53pm
Location: Santa Barbara CA

Re: what is the ignition cable on the LSB30

Post by Voltron » Dec 08 2019 6:04pm

It's better to run it thru a switch, then to the battery.. or else the controller will be on all the time unless you unplug it every time.

Post Reply