New VOTOL EM-200/2?

s10mods

100 µW
Joined
Feb 22, 2017
Messages
9
So I had a VOTOL EM-200 and I fired it, I believed it to be my fault and I was pretty happy with the performance of it so for the cost I ordered another one from QS Motor. When I received it I noticed right away that it looked different. It only uses 1 connector vs 2 and the new one is an AMP that's weather sealed. It's also labeled EM-200/2. I read out the file with the software and the software was listing it as a EM-100. I emailed QS motor and they told me to change it to EM-200. I did that, but this new controller doesn't seem to have the punch the old 200 did. I removed the transistors from the fried EM-200 and ordered some replacements from Aliexpress as I believe thats the only issue with my old one and that was the only place I could find the exact match to what was in it. I have attached some pics for reference. Anyone else received the EM-200/2?
 

Attachments

  • 20210921_183033.jpg
    20210921_183033.jpg
    450.2 KB · Views: 1,527
  • 20211006_200251.jpg
    20211006_200251.jpg
    417.1 KB · Views: 1,521
  • 20211006_200316.jpg
    20211006_200316.jpg
    465.7 KB · Views: 1,527
  • Capture.JPG
    Capture.JPG
    52.3 KB · Views: 1,536
Your issue is on the throttle start settings.

Set to 0-0-250-200.

This will allow full power with no ramping. Be safe using this at first as it will peak power.
 
Back
Top