Marin Stinson Euro Build Thread

General Discussion about electric vehicles.
Post Reply
User avatar
tomjasz   1.21 GW

1.21 GW
Posts: 3844
Joined: Mar 29 2014 1:45pm
Location: Out riding, MN USA
Contact:

Marin Stinson Euro Build Thread

Post by tomjasz » Jan 01 2018 4:35pm

The Stinson 2010 has fork suspension with 63mm travel. All MTB solid forks are 45MM. I do not want a suspension fork. How will 45MM change the ride? Want a front fork with V brake and disc option. Have a set of BB7 for front brakes.
Attachments
Screen Shot 2018-01-01 at 3.33.54 PM.png
Screen Shot 2018-01-01 at 3.33.54 PM.png (223.93 KiB) Viewed 404 times
Screen Shot 2018-01-04 at 10.37.29 AM.png
Screen Shot 2018-01-04 at 10.37.29 AM.png (93.13 KiB) Viewed 354 times
Screen Shot 2018-01-04 at 10.37.46 AM.png
Screen Shot 2018-01-04 at 10.37.46 AM.png (62.53 KiB) Viewed 354 times
Screen Shot 2018-01-04 at 10.54.05 AM.png
Screen Shot 2018-01-04 at 10.54.05 AM.png (103.6 KiB) Viewed 354 times
Last edited by tomjasz on Jan 04 2018 12:02pm, edited 2 times in total.
Thanks Justin_le we're here thanks to you. All the best to the mods for their tireless work keeping it on an even keel.

User avatar
tomjasz   1.21 GW

1.21 GW
Posts: 3844
Joined: Mar 29 2014 1:45pm
Location: Out riding, MN USA
Contact:

Re: Marin Stinson Build Thread

Post by tomjasz » Jan 01 2018 4:35pm

Screen Shot 2018-04-23 at 1.25.08 PM.png
Finally found the PDF version of the catalogue without any gibberish as in the above cut and paste. Finally have 95% of the parts and the build begins. It was to be a 2WD however I'm slowing down and don't need the speed or power. Instead I'll use the front on a KHS Smoothie frame formerly a BBSHD.
Last edited by tomjasz on Apr 24 2018 1:01pm, edited 2 times in total.
Thanks Justin_le we're here thanks to you. All the best to the mods for their tireless work keeping it on an even keel.

User avatar
tomjasz   1.21 GW

1.21 GW
Posts: 3844
Joined: Mar 29 2014 1:45pm
Location: Out riding, MN USA
Contact:

Re: Marin Stinson Build Thread

Post by tomjasz » Jan 01 2018 4:36pm

Reserved
Thanks Justin_le we're here thanks to you. All the best to the mods for their tireless work keeping it on an even keel.

Post Reply