Sevcon Gen4 Drive and DVT Software

bernext

100 µW
Joined
Apr 19, 2018
Messages
7
Location
Mexico City
Hi,

I'm Bernardo Ramirez, from Mexico City.
I bought an EV-kit from ElectricMotorSport, and it worked for a while.
Later on, I messed up with the configuration and it stop working.

Sevcon says I need to contact the dealer. The dealer wants 2000 USD for a diagnostic service.

I would just like to read technical notes, so I can try to figure out this by myself.
I do have the DVT software from Sevcon, with full access license. I have a Gen4 Size 6 drive, and a 80V batt pack. My motor is from Motenergy, PART #DLC28, ME1302.

Are there any priviledged PDFs I can read ? Could anyone point me in the right direction , with the right material ? I can read, and I have plenty of time. I really don't want to be a burden to you guys. I think I can figure this out on my own, but I just need a little orientation.

Regards.
 
Bernardo

Contact me at fgallego@potenciaindustrial.com.mx, we have the DVT software from sevcon and we can help you diagnose your problem.
 
Back
Top