Hailong 3 Battery Case?

adcockj

10 mW
Joined
May 2, 2018
Messages
22
I built up a Trek Dual Sport with a BBSHD kit from Luna. As part of the kit, I bought a 48v 13AH Shark battery from them.
Later, I bought a 17AH battery, intending to use it primarily, with the 13AH battery as a spare.
However, the Shark battery from Luna is on a Hailong 1 mount, and the 17AH battery is on a Hailong 3 mount. I have installed the Hailong 3 mount on the bike.

I can use the Shark as a spare by leaving the battery in its mount and running a separate power cable down to the motor. But it would be better if I could just swap the batteries.

Can I buy a Hailong 3 battery case and swap the internals from the Hailong 1 Shark over to the new case? If so, is there a good source for purchasing the Hailong 3 case?
 
I sure hoped for a solution as I am in a similar situation. Didnt think getting a spare Hailong frame mount to swap my battery between my commuter bike and my weekender bike would be so difficult.

Removing the screws and tie wraps to swap mount to other bike every week is a pain and another Battery at this time is to expensive.

Would love to here from anyone in the supply chain that knows where in the world a person could buy a spare mount for Hailong-3 battery.
 
there you go:

https://california-ebike.com/shop/hailong-3-mounting-foot-new-style/

or but the connectors separately:
https://california-ebike.com/shop/hailong3-new-style-case-connectors-set/
 
Thanks for the info
Ebike.ca got some in so being local it worked out well for me to pick one up directly.
 
hi could any one link me what battery case that has pure nicke sheet (sloted) that fits already with its holder

i can t find it yet
tx
 
Back
Top