RicoSteves
1 mW
- Joined
- Jun 27, 2018
- Messages
- 10
Hello, so amidst collecting resources for an electric inline skates project, I hit the bump that is selecting a motor. I did not know where to get started but found this motor:
https://hobbyking.com/en_us/turnigy-multistar-4225-610kv-16pole-multi-rotor-outrunner.html?___store=en_us
This motor seems like it would suffice for powering each skate individually (2 motors total) with its 9k rpm and 15v as its maximum operating voltage. The motor being mostly flat also helps. The plan is to use the motor to spin a wheel that grips the back wheel of each skate. If anyone with superior knowledge can help justify or debunk my reasoning, it would be greatly appreciated.
https://hobbyking.com/en_us/turnigy-multistar-4225-610kv-16pole-multi-rotor-outrunner.html?___store=en_us
This motor seems like it would suffice for powering each skate individually (2 motors total) with its 9k rpm and 15v as its maximum operating voltage. The motor being mostly flat also helps. The plan is to use the motor to spin a wheel that grips the back wheel of each skate. If anyone with superior knowledge can help justify or debunk my reasoning, it would be greatly appreciated.