I'm selling my very lightly used Revolt 160SH. You can see the pics in my build... Basically only used to measure and build with minimal 'on' time. 20mm shaft diameter. 39.6kV.
Was told when ordered that the, "motor is about 10-15KW cont. and that a 100-140amp controller (at the battery side) will work good with this motor. You need to find the best hall/phase combination, the no load current should be low and the motor should spin smootly (and to the correct direction) up to max rpm." Never used it near any limits, not really sure what the limits are but there's posts on here with different experiences. Mine paired up nicely with a Kelly controller.
Looking to go in a different direction on the build so looking to free up some cash. Looking to sell in Canada, would be easiest this way without crossing borders. Looking for $250 CAD.
Last edited by Leeleeducati
on Sep 19, 2017 6:42 pm, edited 6 times in total.