[EU] [475€] QS205 v3i eBike

Have extra parts that need a good home? Post it up here and see if anyone else is searching for what you are selling.
Post Reply
c.wagner   1 mW

1 mW
Posts: 10
Joined: Apr 09 2020 5:16am

[EU] [475€] QS205 v3i eBike

Post by c.wagner » Mar 28 2021 2:00pm

Selling my basically brand new QS205 v3i "eBike" variant.
I needed the "eScooter" variant so that was an incorrect order.


- QS205 V3i
- 11.3 Kv
- 6mm² phase cables
- dual Hall sensor
- dual Temp sensor

Price new was 455€ plus ca. 20% import cost, is 540€

Shipping inside EU and UK.

If you need any measurements or information regarding the motor or your project, feel free to ask :)

I can also provide you with a set of hubsink v2 cooling fins which lets you push >20kW peak without any heating issues.
20200908_161106.jpg (1.21 MiB) Viewed 238 times
20201218_203213.jpg (3.38 MiB) Viewed 238 times
IMG20210328200049.jpg (2.26 MiB) Viewed 238 times
IMG20210328200417.jpg (3.85 MiB) Viewed 238 times
IMG20210328200501.jpg (2.6 MiB) Viewed 238 times
qs205-drawing.jpg (83.11 KiB) Viewed 238 times

Fastjelle   1 µW

1 µW
Posts: 4
Joined: Apr 03 2021 4:09pm

Re: [EU] [475€] QS205 v3i eBike

Post by Fastjelle » Apr 08 2021 1:47pm

My stealth bomber has 170mm dropouts ....
This is 150mm dropouts ? Can I add spacers or ?

c.wagner   1 mW

1 mW
Posts: 10
Joined: Apr 09 2020 5:16am

Re: [EU] [475€] QS205 v3i eBike

Post by c.wagner » Apr 09 2021 4:54pm

This is 150mm dropout min and 220mm dropout max.
Sure, you can either use spacers (or metrical nut) or maybe your swingarm is flexible enough to "bend" the 2cm :D

Post Reply