[SOLD] Selling 55-60kW Electric Go Kart - North West UK - £3,000

Upperfoot

100 W
Joined
Jan 7, 2018
Messages
123
Now sold.

---

Hello guys, focusing on another venture so I'm wanting to part ways with my Electric Kart, it's in full running condition but I haven't used it in quite a few months and is just gathering dust!

AXpi6tJ.jpeg


You can see a gallery around the Kart here - https://imgur.com/gallery/AGeSKd6, did a bit of an interview about it here (8 minute mark) - https://youtu.be/40a3hsxC16E?t=504

I'm willing to sell it just for the part price and knocked a decent amount off, there has been a lot of love that's went into it and want to sell it as a unit if possible.

It'll come with;

  • Motenergy ME1616 (Water cooled ME1507)
  • Sevcon Gen4 Size 6 (Bit of wear and tear)
  • Sevcon Clearview Display
  • Ixxat Can-to-USB v2.0
  • DLD and DCF Files (Encoder aligned, and DCF's with and without regen off throttle braking)
  • Wiring Harness
  • Gigavac Contactor - GV200PA
  • Gigavac Hermetic Battery Disconnect - HBD41AA
  • 24 x Turnigy Graphene Professional 6S 8000mAh LiPo (Used condition but looked after - 120 amps each, 6 In Parallel, 4 in Series)
  • Battery Box to house 24 x Turnigy Graphene (battery is 4.25kWh)
  • 50mm2 Cables, DINSE connectors and XT90 splitters
  • Kat Racing Chassis with all wheel braking (all foot operated)
  • Rotax Radiator, Hoses and Belt Driven X30 Pump
  • Stone Kart One Man Trolley - https://www.youtube.com/watch?v=Sow7Omopa5I
  • High speed / High torque sprockets
  • 2 x 1500W Power Supplies (For multiple T6 chargers)
  • ISDT T6 Charger (600W version) with parallel charging board for 6 battery packs
  • And various bits and bobs
 
Wow...where were you a year ago when I started my ekart build?? I’m using a ME1507 for my build along with a Sevcon Gen4 size 4. I’m about to start the process of programming the Sevcon any tips?? Thanks!
 
vwgo said:
Wow...where were you a year ago when I started my ekart build?? I’m using a ME1507 for my build along with a Sevcon Gen4 size 4. I’m about to start the process of programming the Sevcon any tips?? Thanks!

Nice one! Just a lot of persistence, and don't be afraid to reach out to people, I wouldn't have gotten far without that help!

Would anyone be interested in the parts individually?
 
hi upperfoot, I have the exact same motor and controller but only get 18kW out of it, batteries not being the limit they support 600A easy. Would you be willing to share the dcf, thanks!
 
Back
Top