- Lyen EC-184110 Controller with USB to TTL programming link
- Cycle Analyst V2.23 (large format I think)
- Hall throttle and two grips
- Programming Software and Notes on CD from Lyen and Others
o Start immediate controller
o Chipset: XCKJ8B116A
o Circuit board version: EB218-A-3
o 18 x genuine IRFB 4110 MOSFET N-CH 100V (tested up to 110V before damage)
o 100V 1000uF Nichicon capacitors equipped
o 72V battery optimized (for higher or lower voltage & current such as 36V-100V, you may need to change the resistor network to avoid damage to the voltage regulator)
o 65A is the current rate (for higher current, you may need to beef up the trace, shunt, and reprogram it via the software)
o Low voltage cut-off: 62.6v
o Battery and motor phase wires gauge size: 12AWG
o Dimension: 9" x 3.4" x 1.75"( 229mm x 87mm x 45mm) plus mount extensions
o Total weight: 805 gram
o SHUNT 1.4 mOhms
Cycle Analyst Manual V2.23 here: https://www.ebikes.ca/documents/CycleAn ... ers223.pdf
NOTE: The controller is unprogrammed and will require some knowledge (best sourced from here on endless sphere) to program and set voltage limits. I did hook up the programming USB pod on a WinXP machine and the controller was alive and would take programming. I contacted Lyen for instructions for Windows 10 and they are included on the CD I will ship with it.
I am "asking" $249 for all of it, and say $15 for shipping and pay-pal fees. I will ship as one package within the Continental USA. When we reach a deal, I will send a paypal invoice and ship to the address of record for that transaction. I apologize, but caring for my wife I have to make things simple. I could describe all these items in more detail, but it best that this goes to someone who already knows what they are getting. Take care guys, sorry I've been away so long...
Feel free to post or PM me any questions. I will do my best to answer.