It's that time...when one must purge. Unfortunately, I'm getting older and I'm required to spend money elsewhere. For that reason, I'm selling all of my ebike related items including my e-motobike. This pseudo motobike has been the result of a huge infatuation with ebikes. I also love going ridiculously fast and have made this bike for that reason. It's a really hardcore custom bike with top end parts and i'm still hesitating to get rid of it, but i must. I have taken the bike up to 60mph w/o any difficulty. The kelly never gets warm and the new cromoV3 is a titan. The new motorims make this bike not a bike, but a motorcycle on the roads. Additionally, i'm getting rid of all the associated ebike parts/gear. Literally, tool boxes full of ebike shit that i'll attempt to list below, which will all be included in the full package of course.
My bike, her name is Kelly....
-Torque raptor frame
-brooks b17 seat
-stratos 8 inverted fork (no longer made)
-rear shock is a 2012 fox RC4 in mint condition
-Truvativ howitzer 83mm bottom bracket
-stroker ace brakes (front and back)
-Kelly KBL96251 controller
-24s4p turnigy lipo with custom harness and fuse
-cromotor v3 with temp sensor (2 sets of halls and 2 temp sensors)
-cromov3 custom laced by JRH with 10ga spokes into a blue 19x1.85" Prowheel motocross rim
-front wheel is a custom laced 19x1.85" blue prowheel rim with 12ga spokes with a DMR revolver hub
-front and rear tires are shinko 241's with almost no wear on em (maybe 15 miles tops on them).
-Cycle analyst V3 installed
-medium bmx style helmet (almost new)
-1200W alloy charger set to 100.8v
-icharger 206b w/ 250w PSU
-5 cell medics
-a bunch of other battery measuring devices, connectors, etc.
-brand new magura mt2 rear EBRAKE with adaptor (yes an ebrake just got em from ilia)
-cycle analyst V2.3 in good condition
-2 extra hayes 8" rotors (new)
-extra hardware for every bike part
-old hayes 9 hydraulic brakes (front and rear)
-old rockshox rear shock (came off of original giant dh comp)
-a bunch of extra 26" rims
-8ga teflon wire
-10ga teflon wire
-25' roll of high temp ptfe 12ga wire
-25' roll of high temp ptfe 22ga wire
-ring terminals, solderless connections, crimps, anderson connectors (15amp, 30amp, 75amp)
-powewerx deluxe crimpset
-lyen's hall/phase testor
-lyen 9fet controller (barely used)
-lyen 18fet 4110 controller (broken, but was "highly modified by lyen"...obviously not that highly since i still blew it)
-lots of ebike wires
-other misc items i have tucked away...
All of this as a package. It would be wicked hard to part everything out. So the bike sells as is and you MUST take all my ebike stuff with it.
I'm looking to get $7000 OBO for everything I own that's E-related. Let the PMs flood my inbox...