$3999 Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Have extra parts that need a good home? Post it up here and see if anyone else is searching for what you are selling.
User avatar
Deutch420   100 W

100 W
Posts: 186
Joined: Jul 09 2011 5:27am
Location: Central NJ

$3999 Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Post by Deutch420 » May 10 2015 3:26pm

3999$ *** with no batteries *** battery pack can be assembled and installed per request
http://m.ebay.com/itm/Custom-Electric-B ... ING_ACTIVE

***I'm willing to part the bike out now. Shoot me offers
Pics added below

Specs:
Frame: Phaser Cycles Spiral grey w/ CF panels.
Motor: crystalye 5403** I keep getting PMs from people who think its a 5304, its not. This comes with the 5403, NOT to be confused with the 5304. This hub is much bigger and heavier than the 5304. This comes with the speed winding 5403. as far as im aware, this was only obtainable through the group buy
Suspension: Front- Fox RC2 Kashima (pristine) /// Rear- Fox RC4 Kashima #450 (pristine)
Controller: Lyen 18fet. 3 speed controller, regen, cruise control. power cables are 75a Andersons with a precharge wire (45a anderson).
Batteries: 24s4p (100v20ah) of the 4S hardcase hobbyking packs. all 10awg high temp silicone w/ 75amp Andersons on discharge harness. 45amp andersons on all the batteries and charge harness. simple plug and play ***not included in price***
Cycly analyst: pristine condition
Brakes: Formula The One with a 203mm rotor
Headset: Chris King, Truativ Stem, carbon fiber spacers.
Tires: Kenda Nevegal 2.5 front and back.
Drive train: Shimano shifter, crank and rear derailer. MRP G2 chain tensioner

It has a twist throttle. Its currently tuned for 8,000watts. wires and fittings are overkill for 8kw. It does 62mph in 120% throttle mode, and thats with 2.5" knobby tires. Does 0-50mph in about 8 seconds. Ive stretched the ride to 100 miles on one charge. Ive also consumed the same pack in 30 miles. it all depends how aggressive you ride. There is not one thing on the bike that doesnt work perfectly, and has worked perfectly for thousands of miles. Everything shows minimal to zero signs of use (other than the rear tire tread and the brake pads/rotor). Frame, fork etc.. have ZERO scratches. there is an added 1" hole under the frame to accommodate all the controller wires. It's gromet'd and done very well. Everything works like a charm. If local, i would consider trades. Im in NJ. Anyone looking for specific pictures or videos, just PM me and ask. Please no tire kickers! Anyone local that wants to stop by to see it, thats fine. However i dont really let anyone ride my bike bc its not insured and im anal. flexible on that for Serious potential buyers. But i can smell you tire kickers from a mile awat

I know if you try to build this new, with identical parts (if you can get them), it would cost $3000-4000 more than im asking. frame and suspension alone would be over 4000$. not to mention countless hours making, building and waiting for parts to arrive from around the world.

feel free to PM me for my cell # if you want to talk or text.
Phaor001.jpg
Phaor001.jpg (204.35 KiB) Viewed 7846 times
20130603_203815[1].jpg
20130603_203815[1].jpg (159.4 KiB) Viewed 7846 times
helmet.jpg
helmet.jpg (48.65 KiB) Viewed 5345 times
helmet tag.jpg
helmet tag.jpg (31.7 KiB) Viewed 5345 times
51MPH UPHILL
Last edited by Deutch420 on Mar 26 2017 12:32pm, edited 19 times in total.
GM Rear, Drill mod. 12FET Lyen @ 45A, 24s2p 100v 10ah LiPo. 1999 Mongoose = 49MPH.
Crystalyte 5304 rear 18FET lyen @ 80amps, 24s4p 100v 20ah LiPo. Kona Dawg = 52mph
Crystalyte 5403 rear 18FET Lyen @ 80amps, 24s4p 100v 20ah LiPo. Phasor frame = 58mph 100%, 62mph 120%

User avatar
pucksterpete   1 kW

1 kW
Posts: 329
Joined: Apr 15 2011 11:11am
Location: Paris France
Contact:

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt

Post by pucksterpete » May 11 2015 3:54pm

Hey Deutch, where you located?
Optim Alp Hardtail with MXUS Motor
20S 2P Turnigy 5.0 Hard Case
Top speed 38mph tops :)
Hyena Special
http://endless-sphere.com/forums/viewto ... 97#p585997
-------
Excelsior/Strong GTS with Cromotor
24S 3P Turnigy 5.0 Hard Case
Top speed so far 53mph
http://endless-sphere.com/forums/viewto ... =6&t=46993

User avatar
mediumrare   1 mW

1 mW
Posts: 14
Joined: Jul 29 2012 12:10pm
Location: Bucks County, PA
Contact:

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt

Post by mediumrare » May 11 2015 4:03pm

pucksterpete wrote:Hey Deutch, where you located?
He's in NJ, USA.
"No man is a hero to his driver."

User avatar
mediumrare   1 mW

1 mW
Posts: 14
Joined: Jul 29 2012 12:10pm
Location: Bucks County, PA
Contact:

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt

Post by mediumrare » May 13 2015 11:00am

Sent a couple PMs.....no response. Where in NJ are you?
"No man is a hero to his driver."

Trackman417   10 kW

10 kW
Posts: 841
Joined: May 05 2011 9:25am
Location: Schenectady, New York

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt

Post by Trackman417 » May 13 2015 11:23am

mediumrare wrote:Sent a couple PMs.....no response. Where in NJ are you?
Hope he doesn't mind.
He is near the Six Flags in Jacksonville, New Jersey.
K2 Sidewinder
H4065 36 mph
20s2p 10aH lipo battery pack
If it didn't kill you, it just built your character.
You know your bike is powerful when even you, the builder, can't control it.
Customer 00001 at our very own Bigmooses online store http://mtg-technologies.com/zencart/ Great guy, great products.

User avatar
Deutch420   100 W

100 W
Posts: 186
Joined: Jul 09 2011 5:27am
Location: Central NJ

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt

Post by Deutch420 » May 13 2015 12:06pm

pucksterpete wrote:Hey Deutch, where you located?
Central NJ near Six Flags.
mediumrare wrote:Sent a couple PMs.....no response. Where in NJ are you?
i have recieved a couple PM's. However, none are from you?!?! maybe try re-sending them?
Trackman417 wrote:
mediumrare wrote:Sent a couple PMs.....no response. Where in NJ are you?
Hope he doesn't mind.
He is near the Six Flags in Jacksonville, New Jersey.
hehe no i dont mind. Thanks for watching over my thread while i work! lol
GM Rear, Drill mod. 12FET Lyen @ 45A, 24s2p 100v 10ah LiPo. 1999 Mongoose = 49MPH.
Crystalyte 5304 rear 18FET lyen @ 80amps, 24s4p 100v 20ah LiPo. Kona Dawg = 52mph
Crystalyte 5403 rear 18FET Lyen @ 80amps, 24s4p 100v 20ah LiPo. Phasor frame = 58mph 100%, 62mph 120%

User avatar
Deutch420   100 W

100 W
Posts: 186
Joined: Jul 09 2011 5:27am
Location: Central NJ

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt

Post by Deutch420 » May 17 2015 10:59am

Lots of PMs. All replied to.
Feel free to ask for my cell for faster communication :)
GM Rear, Drill mod. 12FET Lyen @ 45A, 24s2p 100v 10ah LiPo. 1999 Mongoose = 49MPH.
Crystalyte 5304 rear 18FET lyen @ 80amps, 24s4p 100v 20ah LiPo. Kona Dawg = 52mph
Crystalyte 5403 rear 18FET Lyen @ 80amps, 24s4p 100v 20ah LiPo. Phasor frame = 58mph 100%, 62mph 120%

User avatar
Deutch420   100 W

100 W
Posts: 186
Joined: Jul 09 2011 5:27am
Location: Central NJ

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt

Post by Deutch420 » May 25 2015 12:11pm

Bump

thinking about going the eBay route soon. ill try craigslist too. ill post up links if i do that.
GM Rear, Drill mod. 12FET Lyen @ 45A, 24s2p 100v 10ah LiPo. 1999 Mongoose = 49MPH.
Crystalyte 5304 rear 18FET lyen @ 80amps, 24s4p 100v 20ah LiPo. Kona Dawg = 52mph
Crystalyte 5403 rear 18FET Lyen @ 80amps, 24s4p 100v 20ah LiPo. Phasor frame = 58mph 100%, 62mph 120%

liamcaff   1 kW

1 kW
Posts: 429
Joined: Feb 17 2013 6:21pm
Location: Dublin

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt

Post by liamcaff » May 25 2015 12:26pm

Any idea of shipping to Ireland without the battery?

User avatar
Deutch420   100 W

100 W
Posts: 186
Joined: Jul 09 2011 5:27am
Location: Central NJ

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt

Post by Deutch420 » May 26 2015 1:10pm

liamcaff wrote:Any idea of shipping to Ireland without the battery?
I cant give a good quote without your address, PM'd ya.
Also, from what im reading, anything over 150lbs is freight, and goes by air. i have never, nore has the company i work for ever shipped anythign via boat. And we ship kits all around the world every day. With that said, i would have to try VERY hard to build the crate out of light weight materials to keep the shipping weight under 150lbs. Worse case, i could just ship the motor in a different box, but if you DONT want the batteries, i might be able to get it under 150lbs (including the crate, plywood, 2x4's, screws etc...)
GM Rear, Drill mod. 12FET Lyen @ 45A, 24s2p 100v 10ah LiPo. 1999 Mongoose = 49MPH.
Crystalyte 5304 rear 18FET lyen @ 80amps, 24s4p 100v 20ah LiPo. Kona Dawg = 52mph
Crystalyte 5403 rear 18FET Lyen @ 80amps, 24s4p 100v 20ah LiPo. Phasor frame = 58mph 100%, 62mph 120%

User avatar
Deutch420   100 W

100 W
Posts: 186
Joined: Jul 09 2011 5:27am
Location: Central NJ

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt

Post by Deutch420 » May 27 2015 3:43pm

Looks like shipping of a 6' x1' x 4' box @ 150lbs, to Howth, Dublin 13, insured for 5000$ will cost just around 500$ to ship. This is shipping via air, not boat.
Last edited by Deutch420 on Jul 26 2015 5:32am, edited 1 time in total.
GM Rear, Drill mod. 12FET Lyen @ 45A, 24s2p 100v 10ah LiPo. 1999 Mongoose = 49MPH.
Crystalyte 5304 rear 18FET lyen @ 80amps, 24s4p 100v 20ah LiPo. Kona Dawg = 52mph
Crystalyte 5403 rear 18FET Lyen @ 80amps, 24s4p 100v 20ah LiPo. Phasor frame = 58mph 100%, 62mph 120%

liamcaff   1 kW

1 kW
Posts: 429
Joined: Feb 17 2013 6:21pm
Location: Dublin

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt

Post by liamcaff » May 31 2015 8:31am

replied to your pm :)

User avatar
Deutch420   100 W

100 W
Posts: 186
Joined: Jul 09 2011 5:27am
Location: Central NJ

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt

Post by Deutch420 » Jun 09 2015 12:59pm

Probably going to post it up on eBay, pink bike and craigslist soon. I got some offers here, but nothing too great. When I post up on other websites, I will post the links here too.
GM Rear, Drill mod. 12FET Lyen @ 45A, 24s2p 100v 10ah LiPo. 1999 Mongoose = 49MPH.
Crystalyte 5304 rear 18FET lyen @ 80amps, 24s4p 100v 20ah LiPo. Kona Dawg = 52mph
Crystalyte 5403 rear 18FET Lyen @ 80amps, 24s4p 100v 20ah LiPo. Phasor frame = 58mph 100%, 62mph 120%

User avatar
ohzee   1 MW

1 MW
Posts: 1715
Joined: Jul 20 2011 1:13pm
Location: Columbus Ohio USA

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Post by ohzee » Jun 09 2015 2:07pm

Good Luck.
Last edited by ohzee on Jul 25 2015 8:39pm, edited 1 time in total.

User avatar
mediumrare   1 mW

1 mW
Posts: 14
Joined: Jul 29 2012 12:10pm
Location: Bucks County, PA
Contact:

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Post by mediumrare » Jun 09 2015 2:15pm

ohzee wrote:Good Luck. Call me crazy , but I think if you even just spray painted that rear hub it may help your sale.

It's such a great looking bike , but my eyes are drawn right to the grey and it just feels wrong.
It wouldn't make or break the sale for me, but he's right. I just can't afford it :(
"No man is a hero to his driver."

User avatar
Deutch420   100 W

100 W
Posts: 186
Joined: Jul 09 2011 5:27am
Location: Central NJ

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Post by Deutch420 » Jun 29 2015 2:11pm

Bump
GM Rear, Drill mod. 12FET Lyen @ 45A, 24s2p 100v 10ah LiPo. 1999 Mongoose = 49MPH.
Crystalyte 5304 rear 18FET lyen @ 80amps, 24s4p 100v 20ah LiPo. Kona Dawg = 52mph
Crystalyte 5403 rear 18FET Lyen @ 80amps, 24s4p 100v 20ah LiPo. Phasor frame = 58mph 100%, 62mph 120%

Littleclodbuster   1 µW

1 µW
Posts: 1
Joined: Jul 06 2015 9:19pm

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Post by Littleclodbuster » Jul 06 2015 9:40pm

Newbie here! What does it weigh?

User avatar
Deutch420   100 W

100 W
Posts: 186
Joined: Jul 09 2011 5:27am
Location: Central NJ

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Post by Deutch420 » Jul 07 2015 7:01pm

Littleclodbuster wrote:Newbie here! What does it weigh?
Its pretty heavy. 24x batteries weighing 1.1lb each, plus the motor itself weighs in at 33lbs!! :shock: Just the batteries and motor alone are almost 60lbs!!
All together, its about 110lbs!! :lol:
GM Rear, Drill mod. 12FET Lyen @ 45A, 24s2p 100v 10ah LiPo. 1999 Mongoose = 49MPH.
Crystalyte 5304 rear 18FET lyen @ 80amps, 24s4p 100v 20ah LiPo. Kona Dawg = 52mph
Crystalyte 5403 rear 18FET Lyen @ 80amps, 24s4p 100v 20ah LiPo. Phasor frame = 58mph 100%, 62mph 120%

User avatar
Deutch420   100 W

100 W
Posts: 186
Joined: Jul 09 2011 5:27am
Location: Central NJ

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Post by Deutch420 » Jul 12 2015 12:24pm

Lots of PMs this weekend. All replied to.

It would seem international shipping via ups air is around 500$ . seems to be a common question.
Last edited by Deutch420 on Jul 26 2015 5:33am, edited 1 time in total.
GM Rear, Drill mod. 12FET Lyen @ 45A, 24s2p 100v 10ah LiPo. 1999 Mongoose = 49MPH.
Crystalyte 5304 rear 18FET lyen @ 80amps, 24s4p 100v 20ah LiPo. Kona Dawg = 52mph
Crystalyte 5403 rear 18FET Lyen @ 80amps, 24s4p 100v 20ah LiPo. Phasor frame = 58mph 100%, 62mph 120%

User avatar
Deutch420   100 W

100 W
Posts: 186
Joined: Jul 09 2011 5:27am
Location: Central NJ

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Post by Deutch420 » Jul 25 2015 8:28pm

New international shipping estimate is about $500. This is via air, insured. 7-10 days .
GM Rear, Drill mod. 12FET Lyen @ 45A, 24s2p 100v 10ah LiPo. 1999 Mongoose = 49MPH.
Crystalyte 5304 rear 18FET lyen @ 80amps, 24s4p 100v 20ah LiPo. Kona Dawg = 52mph
Crystalyte 5403 rear 18FET Lyen @ 80amps, 24s4p 100v 20ah LiPo. Phasor frame = 58mph 100%, 62mph 120%

User avatar
Deutch420   100 W

100 W
Posts: 186
Joined: Jul 09 2011 5:27am
Location: Central NJ

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Post by Deutch420 » Oct 09 2015 3:08am

Back up
GM Rear, Drill mod. 12FET Lyen @ 45A, 24s2p 100v 10ah LiPo. 1999 Mongoose = 49MPH.
Crystalyte 5304 rear 18FET lyen @ 80amps, 24s4p 100v 20ah LiPo. Kona Dawg = 52mph
Crystalyte 5403 rear 18FET Lyen @ 80amps, 24s4p 100v 20ah LiPo. Phasor frame = 58mph 100%, 62mph 120%

phalluscopter   1 mW

1 mW
Posts: 17
Joined: Aug 25 2015 10:37pm
Location: San Francisco

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Post by phalluscopter » Oct 15 2015 1:03pm

Are you parting it out yet?

User avatar
moonshine   1 kW

1 kW
Posts: 353
Joined: Oct 09 2011 12:01am
Location: Chevy Chase, MD

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Post by moonshine » Oct 19 2015 9:32pm

Hopefully you don't have to part it out man. But if you do...I'd love to get a hold of the fork...
Current Build: Vector, MXUS 4T in 19" moto, Max-E, 20s8p Samsung 25R http://endless-sphere.com/forums/viewto ... =6&t=67752

Torque Raptor, Cromo V3 in 19" prowheel, Kelly KBL96251, 24s4p (SOLD) http://endless-sphere.com/forums/viewto ... =9&t=56342
Giant DH Comp, X5404/Cromo V2 in 26" rim, Kelly KBL96251/Lyen 18fet, 24s4p (SOLD) http://endless-sphere.com/forums/viewto ... =6&t=40031

User avatar
Deutch420   100 W

100 W
Posts: 186
Joined: Jul 09 2011 5:27am
Location: Central NJ

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Post by Deutch420 » Oct 21 2015 12:43am

I dont want to part it out bc once i sell one part, it renders the whole bike useless.

You can PM me offers on parts if you like, but odds are i wont sell parts unless bulk parts. Again, i dont want the bike to become unusable just so i can get a couple hundred dollars for one part.

I would be willing to sell it, minus a few parts. Like, if you dont like my battery/controller setup, ide be willing to remove unwanted parts and adjust price.

Ive had lots of interested buyers at or close to my askimg price. Problems arise when ups has no domestic freight shipping options in these smaller, international towns. This means the bike gets shipped to the nearest airport. Most interested buyers had no issues picking it up at the airport, however, paypal told me since the airport address is not the buyers verified paypal address, i could very easily be scamed, being that the package was never signed for by the seller at thier verified address. Minor detail, but im not willimg to sell and ship if i have no seller protection. So to all you international guys PMing me, PLEASE make sure ups does domestic freight delivery in your area. Otherwise i cant/wont ship as i would have no protection accordiing to paypal reps. Another biggie, ups will not allow any type of lithium inside international freight. I have confirmed this 4x with 4x different ups reps. Its a UPS rule, not country issued.
GM Rear, Drill mod. 12FET Lyen @ 45A, 24s2p 100v 10ah LiPo. 1999 Mongoose = 49MPH.
Crystalyte 5304 rear 18FET lyen @ 80amps, 24s4p 100v 20ah LiPo. Kona Dawg = 52mph
Crystalyte 5403 rear 18FET Lyen @ 80amps, 24s4p 100v 20ah LiPo. Phasor frame = 58mph 100%, 62mph 120%

lowquality   10 mW

10 mW
Posts: 20
Joined: Sep 17 2015 8:21pm

Re: Complete Phasor w/ 5403, Fox Rc2, 8000watt, 58mph

Post by lowquality » Oct 23 2015 12:14am

if you didnt live in a nazi state id trade you a badass gun for it :)

Post Reply