Astro 3220 motors, Edge 160 controllers, DaVinci drives

Got something to sell? Have extra parts that need a good home? Have something that others would need to complete their kits? Post it up here and see if anyone else is searching for what you are selling.
Post Reply
User avatar
recumpence   100 GW

100 GW
Posts: 5302
Joined: Apr 19 2008 8:33am
Location: On Earth right now. That can change at any time, though..........

Astro 3220 motors, Edge 160 controllers, DaVinci drives

Post by recumpence » Aug 25 2016 5:19pm

Hey Guys,

I have 6 Astro Flight 3220 motors, 6 Castle Creations Edge 160 controllers, and a handfull of DaVinci drive units for sale.

These are all used, but I have gone through all of them and replaced or service whatever needed service. The motors all have 1/2 inch diameter shafts and are vented cans. Vented cans are for fan cooling. I have cooling fans for these motors too.

Here are some prices for you;

-Vented 3220 motor without fan $400 (used). [Remember, new price for this motor is $800.]
-Vented 3220 motor WITH aluminum cooling fan $450 (used).

All of these motors are 6 turn. They are currently setup with Wye termination. I can set them up Delta upon request. That takes about an hour to do. So, it will be $20 extra for Delta termination.

-Edge 160 controller $150 (used). These are normally $329.
-DaVinci Drive unit $350 (used). These are normally $850.


Bear in mind, the controllers look quite good visually. The motors have a few scratches. A couple of them have new wires coming out of the can due to minor damage to the wires that I decided to repair by running new wiring out of the can. The drive units have much more visual scratches and what-not due to use in a gravel environment. Any drive units I sell will be completely dismantled, rebuilt, and any scratches smoothed out as much as is reasonably possible. But, bear in mind, the drive units will ship with scratches. Once again, the controllers look very good, the motors have minor scratches, and the drive units have more scratches and noticeable blemishes. This is reflected in the pricing for each item.

I am the manufacturer of these drive units. I am 100% qualified to do all rebuilding and testing of each component.

I would post pictures, but they would just be pictures of a pile of misc parts right now. For serious inquiries, I will assemble their requested items and send pictures of their order complete.

Matt
1% of the world's population can think "Outside the box". The rest are firmly stuck within the box. Where are you?

User avatar
recumpence   100 GW

100 GW
Posts: 5302
Joined: Apr 19 2008 8:33am
Location: On Earth right now. That can change at any time, though..........

Re: Astro 3220 motors, Edge 160 controllers, DaVinci drives

Post by recumpence » Aug 26 2016 4:17pm

Wow, no interest?

Make me an offer. :mrgreen:

Matt
Last edited by recumpence on Aug 26 2016 4:42pm, edited 1 time in total.
1% of the world's population can think "Outside the box". The rest are firmly stuck within the box. Where are you?

User avatar
steveo   1 MW

1 MW
Posts: 1783
Joined: Oct 06 2007 3:07pm
Location: Woodbridge, Ontario

Re: Astro 3220 motors, Edge 160 controllers, DaVinci drives

Post by steveo » Aug 26 2016 4:33pm

i was literally gonna mesg you on this

but i need a nuvinci hub not a davinci drive LOL

-steveo
Repair Thread
http://endless-sphere.com/forums/viewto ... =3&t=27170
Hub Monster bike ~ 24s7p A123 15.4ah/18kv Six Phase Motor/Dual Max-E Adapttos/32kw~42.91Hp/Est 140LBS
X6 Kmx Trike ~ 24s4p 20ah/X6 MHM 602/Infinion EB324 IRFB 4110/20Kw~26.82Hp/Est 120LBS ~SOLD~
Lightening rods bike ~ 18s2p 10ah/1500w Inrunner/Infinion EB312 IRFB4110/2KW~2.68hp/Est 60LBS
EV Outboard ~ 12s8p 40ah/5KW GM Inrunner/Infinion EB324 IRFB 4110/18Hp Evinrude Drive/Est 100lbs
http://www.youtube.com/user/trdfreak03

User avatar
recumpence   100 GW

100 GW
Posts: 5302
Joined: Apr 19 2008 8:33am
Location: On Earth right now. That can change at any time, though..........

Re: Astro 3220 motors, Edge 160 controllers, DaVinci drives

Post by recumpence » Aug 26 2016 4:42pm

steveo wrote:i was literally gonna mesg you on this

but i need a nuvinci hub not a davinci drive LOL

-steveo
Ha! Too funny. :D
1% of the world's population can think "Outside the box". The rest are firmly stuck within the box. Where are you?

User avatar
jansevr   1 kW

1 kW
Posts: 470
Joined: May 27 2011 6:58pm
Location: Milwaukee, WI, U.S.

Re: Astro 3220 motors, Edge 160 controllers, DaVinci drives

Post by jansevr » Aug 26 2016 5:51pm

I've always been interested in a mid drive, especially your da Vinci drives. I'm currently living in Milwaukee - not too far from you I believe. It would be really cool to plan some weekend to drive down there and see your bikes and talk. I can even bring my em3ev frame and qs motor build if you have any interest in trying it out. Who knows maybe I'll end up with one of your drive systems ;)

User avatar
recumpence   100 GW

100 GW
Posts: 5302
Joined: Apr 19 2008 8:33am
Location: On Earth right now. That can change at any time, though..........

Re: Astro 3220 motors, Edge 160 controllers, DaVinci drives

Post by recumpence » Aug 26 2016 6:41pm

jansevr wrote:I've always been interested in a mid drive, especially your da Vinci drives. I'm currently living in Milwaukee - not too far from you I believe. It would be really cool to plan some weekend to drive down there and see your bikes and talk. I can even bring my em3ev frame and qs motor build if you have any interest in trying it out. Who knows maybe I'll end up with one of your drive systems ;)
Hey Man, come down any time. Heck this weekend would work. I have 3 bikes currently running. You can ride all of them If you would like.

I can pm you my number if you would like.

Matt
1% of the world's population can think "Outside the box". The rest are firmly stuck within the box. Where are you?

User avatar
recumpence   100 GW

100 GW
Posts: 5302
Joined: Apr 19 2008 8:33am
Location: On Earth right now. That can change at any time, though..........

Re: Astro 3220 motors, Edge 160 controllers, DaVinci drives

Post by recumpence » Aug 30 2016 6:38am

Thank you Guys for the PMs and the interest shown along with those who have purchased.

I still have 4 motors available (one is spoken for but not confirmed yet) and 5 controllers (again, one is spoken for but not confirmed).

Matt
1% of the world's population can think "Outside the box". The rest are firmly stuck within the box. Where are you?

User avatar
recumpence   100 GW

100 GW
Posts: 5302
Joined: Apr 19 2008 8:33am
Location: On Earth right now. That can change at any time, though..........

Re: Astro 3220 motors, Edge 160 controllers, DaVinci drives

Post by recumpence » Sep 17 2016 5:15pm

The controllers are all sold or spoken for. I have one motor left. I have 5 DaVinci drives remaining.

Matt
1% of the world's population can think "Outside the box". The rest are firmly stuck within the box. Where are you?

Mpenn   1 µW

1 µW
Posts: 2
Joined: Mar 07 2016 11:24am

Re: Astro 3220 motors, Edge 160 controllers, DaVinci drives

Post by Mpenn » Sep 06 2020 3:53am

I know this is very old... anything available still? a motor and a drive.

SlowCo   1 MW

1 MW
Posts: 1542
Joined: Jan 05 2015 5:43pm
Location: The Netherlands

Re: Astro 3220 motors, Edge 160 controllers, DaVinci drives

Post by SlowCo » Sep 07 2020 4:52am

Mpenn wrote:
Sep 06 2020 3:53am
I know this is very old... anything available still? a motor and a drive.
NTDWM but there is a recent offering here: viewtopic.php?f=9&t=108050

Post Reply