Zero Motorcycles BATTERY for your E-projects!!

[Doctorbass]

Hello guys i recently bought a stock of used Zero battery ( ZF2.8 and ZF11.4 !!)

I am ready to sell some of these that i will not use

This is incredible RARE offer of the most performant QUALITY battery for ebike and e-motorcycles!!

My actyal NYX 16kW operate with 22s of the cells of these battery

I will add more info and pictures soon. no worrie!

Well i am figuring 250$ per kWh

1000$ for each Zf2.8 and 4000$( worth 3000$usd) for the ZF11.4 (worth 12 000 usd)

I will include performance check.

Anyone interested PM me!


These battery are the most compact battery and are made of HIGH QUALITY 25Ah NMC FARASIS poutch in very STRONG aluminum case!

Spec of the cells iside these modules here: https://www.cdiweb.com/datasheets/ctc-b ... 5Ah-v5.pdf

each modules are 28s 102V nominal 116V full but you can reconfigured the way you want.

Farasis cells specs:
5C continous 7C peak
capable of 400A burst at 100% SOC

I have 3x ZF2.8
- (2.5kWh usable)
-28s1p
ULTRACOMPACT
http://cyclepartstriumph.com/index.php? ... ts_id=1028


http://www.mbike.com/news/wp-content/up ... 00x357.jpg

https://evmc2.files.wordpress.com/2013/ ... _press.jpg


and

1x ZF11.4 ( the full pack of the Zero 2013 S and DS) !
-(10.0kWh usable)
-4 modules 28s1p in parallel
- 500A contactor
-the 4p cells are capable 500A continuous 700A burst 1600A at 100%soc
-ULTRACOMPACT
INSIDE



I will add info very soon!

Doc

[kneedeep]

I am in Ontario very interested in a price.

[Doctorbass]

It is also possible to split the ZF2.8 battery like i did for the NYX project:






https://endless-sphere.com/forums/viewt ... =nyx+built

[Kin]

Kind of curious to hear updates on this thread ^_^. Nice batteries.

Any idea if any packs would be remotely suitable for putting in series? concerned about used packs not really being well matched, but maybe you will respond that they are decently matched.

[Doctorbass]

Kind of curious to hear updates on this thread ^_^. Nice batteries.

Any idea if any packs would be remotely suitable for putting in series? concerned about used packs not really being well matched, but maybe you will respond that they are decently matched.

Some of these packs had deffective BMS. I will connect a Zero BMS to the one that dont have any and see the state of each cells. from what i know these have excellent cells usually very well matched

Not to confuse with cheap chineese cells...

Arlo already use some of these in serie for his Drag race CRX

Doc

[Kin]

I'm sorry, I was not very clear.

I mean, maybe pack A is made of 28 cells, C0,C1,C2...C27. Pack B is made of 28 cells, D0,D1,...D27.

I understand matching between [C0...C27] is good, but what do you think about a pack of [C0...C27,D0...D27]?

In other words, putting two of these battery banks in series? I understand they're more likely to go out of match , but is it remotely rational? I assume BMS would need to be removed.

[Doctorbass]

I'm sorry, I was not very clear.

I mean, maybe pack A is made of 28 cells, C0,C1,C2...C27. Pack B is made of 28 cells, D0,D1,...D27.

I understand matching between [C0...C27] is good, but what do you think about a pack of [C0...C27,D0...D27]?

In other words, putting two of these battery banks in series? I understand they're more likely to go out of match , but is it remotely rational? I assume BMS would need to be removed.

Well we need to be sure that paralle is Paralle and serie is Serie.. sorry to ask but there is alot of people here still confusing serie and parallel...

PARALLEL: paralel positive and parallel negative
SERIE: first positive connected to second negative, ---(-+)(-+)(-+)+++

These Zero modules ( ZF2.8 of the Zero XU and FX are correct to be paralleled , this is what happen in the big monolith of the S, SR, DSR etc

In serie, yes, module 1 should be same capacity and similar RI as module 2 i serie with it etc...

Doc

[binlagin]

Also very interested in this! Please add me on FB to discuss further if you'd like http://www.facebook.com/binlagin.

I'm in Ottawa and can meetup with you Dr.Bass, I've purchased your dropouts for other builds!

I need a battery for my current project!

[robby]

Do you still have the ZF 2.8 packs for sale? Both of mine are shot. I was planning to rebuild them, but I just opened one up and the cells are bloated to the point that the casing is collapsing on itself when I remove a few screws. I'm looking to either replace the packs or build something compatible from scratch.

[michaelebradley]

looking for cells to finish rebuilding a 2012 Zero Model X battery pack. The cells are EIG 20 Ah I believe. Anybody know where they can be found?