I recently finished building an Ebike that I plan on selling different models of but I wanted to post a few performance specs.
The bikes was programmed Zombiess parameter designer and I set the rated amps @ 120 and phase amps @ 300 when I have the speed switch set to 115% of the power and my cycle analyst put in hi range with my power gains both set to 999. The bike is amazing. It will pull wheelies all the way up to 12mph and its pumping out 144amps and 8000watts to the cromotor v3. The bike is extremely fast. It pulls hard all the way up to 40mph on a 20inch wheel. I am adding 12 more 3.2-20ah lifepo4 cells to the 40 I already have to make it 52 cells/26s2p (84v 40ah) and I'm currently having my Bms hcx-d170 built with a limit of 150amps @ 26s. I am thinking about adding a 36fet controller to pump more amps because I can't safely upgrade the 24fet controller to 150amps without possible damage. I plan on building my next bike with a stretched micargi frame..
Thanks
Brian
The bikes was programmed Zombiess parameter designer and I set the rated amps @ 120 and phase amps @ 300 when I have the speed switch set to 115% of the power and my cycle analyst put in hi range with my power gains both set to 999. The bike is amazing. It will pull wheelies all the way up to 12mph and its pumping out 144amps and 8000watts to the cromotor v3. The bike is extremely fast. It pulls hard all the way up to 40mph on a 20inch wheel. I am adding 12 more 3.2-20ah lifepo4 cells to the 40 I already have to make it 52 cells/26s2p (84v 40ah) and I'm currently having my Bms hcx-d170 built with a limit of 150amps @ 26s. I am thinking about adding a 36fet controller to pump more amps because I can't safely upgrade the 24fet controller to 150amps without possible damage. I plan on building my next bike with a stretched micargi frame..
Thanks
Brian