tomjasz
1 GW
Anxiously waiting for the final version...
Definitely interested in how you get on!tomjasz said:New one on the way. Cool. Thanks!
tomjasz said:Still nothing. Tracking still shows no progress beyond the acceptance in Poland. Grrrrrrr
Joe Cool said:and?
tomjasz said:I'm not as down on the device as Teslanv and it might have a place on OEM installs or slower old guy bikes.
I didn't worry about both brakes being linked since I NEVER brake using a single lever. Habits left over from PTW days. The only safe way to brake on a scooter and MC was using both levers at all times. It's locked into my muscle memory.eyebyesickle said:yea, that is the one i'm talking about. I just want to wire the two brake sensors together, so when I plug in that button everything is still fully functional.
tomjasz said:I didn't worry about both brakes being linked since I NEVER brake using a single lever. Habits left over from PTW days. The only safe way to brake on a scooter and MC was using both levers at all times. It's locked into my muscle memory.eyebyesickle said:yea, that is the one i'm talking about. I just want to wire the two brake sensors together, so when I plug in that button everything is still fully functional.
I wonder what Lectric did to incorporate.
tomjasz said:A number of us have tested them. The information is all in this thread. Yes Lectric is the USA distributor of the device. The first versions were sensitive to moisture. A problem eliminated in the final version. Yes it does stop the annoying brake tap, and replaces it with a device that does the same momentary stop when you shift. The greasiness works just like the brake tap. A momentary stop to the motor. But for $90. I have one. I like it. But it doesn't respond any different than a brake tap, rather it eliminates one small action. Convenient? Yes. Worth $90? The value is up to the user.
It's hard to sort out until someone reports on the Lectric version. They have renamed the BBS but the photos show 8Fun.
Keefe claims to be in the loop on some phase of the BBS update but is not forthcoming yet. Several of us find it odd that Bafang has not shown a 1000W version or a 100MM version to any other suppliers. At this stage it's all speculation.
It is highly recommended that a new shifter cable and housing is used along with a properly tuned rear derailleur for optimal performance.
Worn or damaged shifter cables, cable housing or an incorrectly adjusted derailleur can lead to decreased functionality.
Connects to the dedicated Gear Sensor cable that is included with all e-RAD 500w and 750w drive units.
Tuned specifically for e-RAD Mid Drive Kits.
Compatible with Bafang BBS Motors (BBS01 and BBS02)
When used with 8FUN Bafang BBS Motors, there will be an increased delay when the motor resumes operation after shifting
Gear Sensor will have to connect to one of the two e-brake connectors leaving only one connector left for an e-brake lever or sensor.