Hi Endless-sphere and all friendly people!
Scooter overview, the first impression can be found here, but in this topic we would turn to the technical side: inside parts, features and upgrade. I will complement this header and expand it with useful links and disassembling videos.
Preparation before your first ride and on a wet road.
1. Stock up on blue Loctite, not all the screws are treated, but those was loose when scooter came to me:
2. Prepare some powerful pump (shock pump works perfect) and inflate tires to at least 3 atmospheres. Tires are deflated on arrival and you can't expect to ride from the post office without a pump.
3. You would need extra sealing if you drive in the rain or crossing pools, that's what happened to me - controller box and the battery section are wet and dirty
Disassembly
1. Battery consists of low current Samsung 18650 ICR 2250 mAh (40 elements) connected 10s4p
2. Controller (to remove it, unscrew 10 screws, four of them holding steering row and four are on the bottom size and the last two screws holding the plastic corners)
3. Body and steering rod mount
Steering rod mounts through a three-layer cake of metal 3mm thick each. Top layer - folding mech. steel base, middle level - aluminium body itself and bottom level is a steel front bracket (holding controller inside).
4. Old model throttle wiring
Black-White-Red - the trigger (Black general, White - signal, Red - halls power).
Yellow - controller switch
Brown - input to the power button on controller
Green - power indicator input (for display connect to the Yellow)
Useful links:
Here is official Inokim website where you can found a lot of useful stuff. They upgrading it continuously.
Here you can check how to change a tire on a motor-wheel.
Here you can download the latest spare parts catalog
Replacing the battery
Scooter overview, the first impression can be found here, but in this topic we would turn to the technical side: inside parts, features and upgrade. I will complement this header and expand it with useful links and disassembling videos.
Preparation before your first ride and on a wet road.
1. Stock up on blue Loctite, not all the screws are treated, but those was loose when scooter came to me:
3. You would need extra sealing if you drive in the rain or crossing pools, that's what happened to me - controller box and the battery section are wet and dirty
1. Battery consists of low current Samsung 18650 ICR 2250 mAh (40 elements) connected 10s4p
Steering rod mounts through a three-layer cake of metal 3mm thick each. Top layer - folding mech. steel base, middle level - aluminium body itself and bottom level is a steel front bracket (holding controller inside).
Yellow - controller switch
Brown - input to the power button on controller
Green - power indicator input (for display connect to the Yellow)
Useful links:
Here is official Inokim website where you can found a lot of useful stuff. They upgrading it continuously.
Here you can check how to change a tire on a motor-wheel.
Here you can download the latest spare parts catalog
Replacing the battery