DIY Boosted inspired electric longboard

Lightweight / Folding / Portable EVs - seats optional
User avatar
Squad   100 W

100 W
Posts: 148
Joined: Jun 28 2015 4:29pm

DIY Boosted inspired electric longboard

Post by Squad » Oct 05 2015 9:08am

Hi, I'm dentistry student, and hobbyist knifemaker from Poland. Few months ago I found boosted boards on IG and decided that electric longboard is my next must-have thing, doing reaserch I found ES forum and I've been reading it for a while now :D In june I ordered all necessary components and the adventure begun. I wanted to keep this built as much DIY as possible, in my workshop I have small manual mill with rotary table, small lathe, and knifemakers best friend- belt grinder. I sketched motor mounts in autocad, and milled them out of aluminium, and motor-mounting plates out of 3mm stainless steel (heat-threated after machining). Drive wheel hubs were turned by me out of industrial grade pulleys so it required a little bit of turning. I also made mosfet-based power-switch (theoretically capable of 200A peak). Battery pack was soldered using 8AWG wires, and the "power stripes" glued (I did not wanted to mill the deck) below the deck are cut out of 1mm thick copper sheet and 10mm wide, so generally it's a little bit of overkill compared to what I see here mostly. The most characteristic for boosted are beautiful enclousures, my initial idea was to make them out of kydex I use for knife/gun holsters, but then decided to use carbon fiber, after second, non satisfying attempt (and lot of wasted money) I returned back to kydex. I modeled enclousures positives out of wood and car putty, then gave them to be painted (in order to make fine molds). The controler is my only issue right now, I need to stabilize connection between 2 arduino nano's and NRF24l01, I'll get rid of onboard antennas and make my own. The controler visible in my first photo got fried reciever due to APS faulty BEC (replaced by Bruno), then I decided to use nunchuck based solution. Used erwincoumans code and instructions he posted on forum (thanks!).

When my longboard was still in construction phase okp posted build thread with similiar goal, I was curious how will his board look, now all of You have opportunity to compare. All right so now lets move on to the technical data:
Motors are NTM 50-60 270 KV, geared at 2/1
ESC is APS 120A dual
Battery pack is 10000 mAh 7S2P (5000 mAh per cell)
Deck is Vanguard flex 3, orangatang kegel wheels, caliber trucks
Weight is about 7 kg
For now I reached 45 km/h, but there was some power left (I calculated for about 55 km/h)
During testing I rode 12 km consuming 3500 mAh, (calm commuting).
Now photos:
http://imgur.com/a/6achp <- link to entire album

Image
Last edited by Squad on Mar 30 2016 4:56am, edited 4 times in total.

jamesonotc   10 W

10 W
Posts: 70
Joined: Jun 20 2015 12:49am

Re: DIY boosted inspired electric longboard

Post by jamesonotc » Oct 05 2015 9:27am

any chance you would consider making more of the enclosures for sale? Id be interested in buying a set.

Very nice build!

User avatar
Squad   100 W

100 W
Posts: 148
Joined: Jun 28 2015 4:29pm

Re: DIY boosted inspired electric longboard

Post by Squad » Oct 05 2015 9:33am

Thanks, yup, that is possible, but unfortunately I don't know when (I'm studying in Kraków but my workshop is near Katowice) this semester is going to be busy... Write PM if You don't mind to wait some time :wink:

User avatar
maxchilton   10 W

10 W
Posts: 92
Joined: Jul 15 2015 10:30am

Re: DIY boosted inspired electric longboard

Post by maxchilton » Oct 05 2015 9:34am

wow, super clean build. Looks very professional.
.









das it mane.

torqueboards   100 MW

100 MW
Posts: 2940
Joined: May 27 2013 10:02pm
Location: San Francisco, CA
Contact:

Re: DIY boosted inspired electric longboard

Post by torqueboards » Oct 05 2015 9:38am

Haha great job! Photos are amazing :mrgreen: :mrgreen:
DIYElectricSkateboard.com Electric Skateboard Kits

User avatar
okp   100 kW

100 kW
Posts: 1153
Joined: Oct 26 2014 3:27pm
Location: Paris
Contact:

Re: DIY boosted inspired electric longboard

Post by okp » Oct 05 2015 10:30am

impressive ! congrats. Yours look way better IMO. I wish I could access to something other than my dremel !

User avatar
Squad   100 W

100 W
Posts: 148
Joined: Jun 28 2015 4:29pm

Re: DIY boosted inspired electric longboard

Post by Squad » Oct 05 2015 10:40am

I highly respect people without lots of equipment creating nice things (like knifemakers using files instead of belt grinder :o ), so congrats for Your both builds okp, been looking at both threads for few months, I just decided to reveal myself when I finish build! And when it comes to motors and ESC your bulid is waaay ahead of mine :) It was interesting to see and compare different approach to reach similiar goal. Thanks!

erwincoumans   100 W

100 W
Posts: 141
Joined: Apr 02 2015 11:25pm

Re: DIY boosted inspired electric longboard

Post by erwincoumans » Oct 05 2015 10:47am

Congrats, this looks great. It might help to keep a few extra cm. distance between Arduino /nRF24l01 and ESC (especially mosfets). Also the nrf24 version with PA+NLA+longer antenna might be better.

What mill did you use to mill aluminium? How did you attach pulley to motor shaft? Did you grind a keyhole or flats for set screw?

Vulthor   100 W

100 W
Posts: 149
Joined: Aug 08 2015 12:43am

Re: DIY boosted inspired electric longboard

Post by Vulthor » Oct 05 2015 10:53am

Very impressive, looking great.

Can't really compared to okp build, both of you did amazing job, but with different tools.
"I pushed a button"

User avatar
Squad   100 W

100 W
Posts: 148
Joined: Jun 28 2015 4:29pm

Re: DIY boosted inspired electric longboard

Post by Squad » Oct 05 2015 11:01am

I'm planning to modify reciever NRF24l01 and equip it with router antenna. My mill is similiar to grizzly G0704 (SP2217 rebranded by polish company). Motor shaft has milled keyway, as well as motor pulley, shaft also has milled flat spot for set screw that prevents pulley from sliding off the shaft.

User avatar
whitepony   10 kW

10 kW
Posts: 663
Joined: Feb 19 2015 12:37pm

Re: DIY boosted inspired electric longboard

Post by whitepony » Oct 05 2015 12:52pm

wow, this must be the most professionally looking build I have ever seen here on the forums! incredibly nice looks on just about everything. your motor mounts are stunning and I LOVE the supporting rod between the 2 mounts!! you set the bar way too high :D

User avatar
Squad   100 W

100 W
Posts: 148
Joined: Jun 28 2015 4:29pm

Re: DIY boosted inspired electric longboard

Post by Squad » Oct 05 2015 1:17pm

I got the supporting bar idea from one of ES build threads, decided that it's great way to support and make whole drivetrain more stiff, also give a little protection for the motors (https://endless-sphere.com/forums/viewt ... 35&t=60280 thanks for the idea to the author :) ) . Thanks one more time for all the positive feedback, I did my best and used the possibilities my workshop gives me. I bet this build when it comes to costs reached commercial available eboards price level (And I, fool, thought it'll be cheaper than getting ready one :D ) but I think it outperformes most of them and Iearned a lot (and that is priceless :wink: ).

saming   10 W

10 W
Posts: 97
Joined: May 06 2014 9:04pm

Re: DIY boosted inspired electric longboard

Post by saming » Oct 05 2015 3:19pm

Great Build this is the reason i dont post my build. Your DYI Build shames me.;P just amazing

User avatar
sl33py   10 kW

10 kW
Posts: 686
Joined: Apr 24 2015 5:21pm
Location: Seattle, WA

Re: DIY boosted inspired electric longboard

Post by sl33py » Oct 05 2015 5:51pm

That is beautiful. Impressive skill and execution - my hats off to you!

Looks better than most commercial/pro offerings...

Would love to see more detail on your anti-spark mosfet power switch and flat wire between the cases!

User avatar
Squad   100 W

100 W
Posts: 148
Joined: Jun 28 2015 4:29pm

Re: DIY boosted inspired electric longboard

Post by Squad » Oct 05 2015 6:11pm

The mosfet switch is based on scheme I found on the internet (attachment) (https://www.alexrc.pl/viewtopic.php?f=1 ... 4&start=63 link to thread in polish, there is smd pcb layout, mine was similiar) I used 4 parallel connected IRFS7430-7PPBF mosfets, soldered on separate board on 1mm thick copper "trace" I machined, so this should handle very high currents. I'll post pics on weekend. The flat wire isn't actually "wire", it's 10 mm wide strip of 1mm thick copper sheet, covered by shrink tube, mounted using super-extra-strenght double sided mounting tape :wink: I decided that the board isn't flexing that much to cause any material fatigue to break them (and it's 10mm^2 of almost pure copper, at cross section, super low resistance).
Attachments
e-switch_01_1c31010.jpg
e-switch_01_1c31010.jpg (48.46 KiB) Viewed 10501 times

lox897   100 W

100 W
Posts: 110
Joined: Jul 04 2015 2:43am

Re: DIY boosted inspired electric longboard

Post by lox897 » Oct 05 2015 7:45pm

I would mistake that board for a boosted. All you need is some boosted grip tape :D

Did you mould those enclosures from the original boosted enclosure? Did you have a boosted before this build?

Very professional build.

Hummina Shadeeba   1 MW

1 MW
Posts: 1603
Joined: Apr 25 2014 10:26pm

Re: DIY boosted inspired electric longboard

Post by Hummina Shadeeba » Oct 05 2015 10:04pm

Really nice.
What's the small hole on the steel part of the motor mount for? I guess it could protect. Or maybe they helped with the manufacture? All I can guess

jamesonotc   10 W

10 W
Posts: 70
Joined: Jun 20 2015 12:49am

Re: DIY boosted inspired electric longboard

Post by jamesonotc » Oct 05 2015 10:39pm

Hummina Shadeeba wrote:Really nice.
What's the small hole on the steel part of the motor mount for? I guess it could protect. Or maybe they helped with the manufacture? All I can guess

In the images there is a shot here... looks likes its for structural support/spacing and possibly to protect from impact.

Image

akiraEC   100 W

100 W
Posts: 133
Joined: Jan 29 2015 5:35pm

Re: DIY boosted inspired electric longboard

Post by akiraEC » Oct 06 2015 2:29am

Squad wrote:The mosfet switch is based on scheme I found on the internet (attachment) (https://www.alexrc.pl/viewtopic.php?f=1 ... 4&start=63 link to thread in polish, there is smd pcb layout, mine was similiar) I used 4 parallel connected IRFS7430-7PPBF mosfets, soldered on separate board on 1mm thick copper "trace" I machined, so this should handle very high currents. I'll post pics on weekend. The flat wire isn't actually "wire", it's 10 mm wide strip of 1mm thick copper sheet, covered by shrink tube, mounted using super-extra-strenght double sided mounting tape :wink: I decided that the board isn't flexing that much to cause any material fatigue to break them (and it's 10mm^2 of almost pure copper, at cross section, super low resistance).
Great built !
Very interrested by your antispark design.
The schematic you show has only two FETs right ?
If you would agree to share the 4 FET schematic and/or the PCB design, I'd love to make one for my board !!

User avatar
onloop   10 kW

10 kW
Posts: 600
Joined: Jun 24 2013 5:24am
Location: Australia
Contact:

Re: DIY boosted inspired electric longboard

Post by onloop » Oct 06 2015 4:55am

This is an amazing DIY build..... congratulations!

User avatar
Squad   100 W

100 W
Posts: 148
Joined: Jun 28 2015 4:29pm

Re: DIY boosted inspired electric longboard

Post by Squad » Oct 06 2015 5:48am

akiraEC wrote: Great built !
Very interrested by your antispark design.
The schematic you show has only two FETs right ?
If you would agree to share the 4 FET schematic and/or the PCB design, I'd love to make one for my board !!
First of all it's not my antispark switch design :wink:, I made the pcb using laser printer and chalk paper, heat transfered the trace-mask with iron, then etched it with ferric chloride. I added 2 more FET's parallel to those two on the scheme, BUT now I would just buy one high current FET like IXFN200N07 (the same price range as my 4 FET's). If You're interested I have .pdf traces layout for the boards I built, write PM if You want it.

Thanks onloop!

higrade   100 mW

100 mW
Posts: 37
Joined: Jan 16 2015 3:48pm

Re: DIY boosted inspired electric longboard

Post by higrade » Oct 06 2015 6:12am

yep going to need one of thoese enclosures too

206monkey32   10 W

10 W
Posts: 77
Joined: Mar 08 2015 12:11pm

Re: DIY boosted inspired electric longboard

Post by 206monkey32 » Oct 06 2015 7:48am

Sick build man. You've got me looking at mills now :lol: I was curious what thickness kydex you are using for your enclosures. Again...just awesome.

Silenthunter   100 W

100 W
Posts: 283
Joined: Mar 24 2013 11:38pm

Re: DIY boosted inspired electric longboard

Post by Silenthunter » Oct 06 2015 8:09am

Awesome build. Maybe you can place those pulleys on a Bridgeport and cut a bit so you can place a bearing exactly as boosted so there is no movement and the wheels pull straight.
If you run it like that without the bearings the wheels will wobble after 6-8 months.

User avatar
Squad   100 W

100 W
Posts: 148
Joined: Jun 28 2015 4:29pm

Re: DIY boosted inspired electric longboard

Post by Squad » Oct 06 2015 8:43am

206monkey32 wrote:Sick build man. You've got me looking at mills now :lol: I was curious what thickness kydex you are using for your enclosures. Again...just awesome.
Kydex is pretty thin, it's either 1,5 mm or 2 mm thick. As one of pictures shows I glued G10 reinforcements in places where screws hold the enclousures against the deck. Overall I think that's even better that they can flex with deck.
Silenthunter wrote:Awesome build. Maybe you can place those pulleys on a Bridgeport and cut a bit so you can place a bearing exactly as boosted so there is no movement and the wheels pull straight.
If you run it like that without the bearings the wheels will wobble after 6-8 months.
Good point, this may be a weak point of this additional bearing-free solution, I'll se how this turns out in longer term, I use bear spaceballs bearings, and they have longer inner ring that acts as half of a spacer per bearing and I screwed on the wheel nuts very tight, maybe kegels will withstand...

Post Reply