Hi, I need some help with my build.. Its my first build so I have some strange questions))
Planning to go 25-30mph and 10 miles range or so
Motor: Turnigy Aerodrive SK3 - 6374-192kv Brushless Outrunner Motor ( no hall sensor installation, Im not ready for this)
Lipo choice: (need help)
1. total 12s out of 3 x (Multistar High Capacity 4S 10000mAh Multi-Rotor Lipo Pack 10C ) - best price for 1000mah but im not sure that 10C Discharge will work here?
2. total 12s out of 3 x (4S Turnigy 7200mAh 14.8V Hardcase Pack 40C )
3. should I go 12S in this build? and.. is it better to go 2x6S than 3x? whats the difference? I believe that its easier to charge 2x6S than 3x4S...
Controller
4. I have no clue what controller to buy, something simple and not pricey. I believe I need ESC that can handle 100-120A, Is is correct?
5. Can I use my stock ESR thumb throttle with ESC u choose from №4? Or I Need to buy something like this http://www.ebay.com/itm/48V-Ebike-Electric-Bike-Kit-Thumb-Throttle-/181727086854?hash=item2a4fc74906
6. Sprockets. Please tell me what sprockets do I need? I know its 8mm but how many teeth? What about wheel sprocket? Someone mentioned this site http://www.surpluscenter.com
7. Charger. Is it a good choice for me Turnigy MEGA 1000W 8S 40A + PC Power supply 500-700W http://hobbyking.com/hobbyking/store/__39177__Turnigy_MEGA_1000W_8S_40A_Lithium_Polymer_Balance_Charger.html
Thank you!
Planning to go 25-30mph and 10 miles range or so
Motor: Turnigy Aerodrive SK3 - 6374-192kv Brushless Outrunner Motor ( no hall sensor installation, Im not ready for this)
Lipo choice: (need help)
1. total 12s out of 3 x (Multistar High Capacity 4S 10000mAh Multi-Rotor Lipo Pack 10C ) - best price for 1000mah but im not sure that 10C Discharge will work here?
2. total 12s out of 3 x (4S Turnigy 7200mAh 14.8V Hardcase Pack 40C )
3. should I go 12S in this build? and.. is it better to go 2x6S than 3x? whats the difference? I believe that its easier to charge 2x6S than 3x4S...
Controller
4. I have no clue what controller to buy, something simple and not pricey. I believe I need ESC that can handle 100-120A, Is is correct?
5. Can I use my stock ESR thumb throttle with ESC u choose from №4? Or I Need to buy something like this http://www.ebay.com/itm/48V-Ebike-Electric-Bike-Kit-Thumb-Throttle-/181727086854?hash=item2a4fc74906
6. Sprockets. Please tell me what sprockets do I need? I know its 8mm but how many teeth? What about wheel sprocket? Someone mentioned this site http://www.surpluscenter.com
7. Charger. Is it a good choice for me Turnigy MEGA 1000W 8S 40A + PC Power supply 500-700W http://hobbyking.com/hobbyking/store/__39177__Turnigy_MEGA_1000W_8S_40A_Lithium_Polymer_Balance_Charger.html
Thank you!